DS10CP152集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

DS10CP152属于集成电路（IC）的信号开关多路复用器解码器。由德州仪器制造生产的DS10CP152信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

1FEATURES

2• DC - 1.5 Gbps Low Jitter, Low Skew, Low

Power Operation

• Pin Configurable, Fully Differential, Non-

Blocking Architecture

• Wide Input Common Mode Voltage Range

Allows DC-Coupled Interface to LVDS, CML

and LVPECL Drivers

• On-chip 100Ω Input and Output Termination

Minimizes Insertion and Return Losses,

Reduces Component Count and Minimizes

Board Space

• 7 kV ESD on LVDS I/O Pins Protects Adjoining

Components

• Small SOIC-16 Space Saving Package

APPLICATIONS

• High-Speed Channel Select Applications

• Clock and Data Buffering and Muxing

• SD/HD SDI Routers

DESCRIPTION

The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint

switch optimized for high-speed signal routing and

switching over lossy FR-4 printed circuit board

backplanes and balanced cables. Fully differential

signal paths ensure exceptional signal integrity and

noise immunity. The non-blocking architecture allows

connections of any input to any output or outputs.

Wide input common mode range allows the switch to

accept signals with LVDS, CML and LVPECL levels;

the output levels are LVDS. A very small package

footprint requires a minimal space on the board while

the flow-through pinout allows easy board layout.

Each differential input and output is internally

terminated with a 100Ω resistor to lower device return

losses, reduce component count and further minimize

board space.