DRV8962-Q1中文资料具有集成电流检测功能的汽车级 70V 单通道或双通道 H 桥或四通道半桥驱动器数据手册TI规格书

描述 Description

The DRV8962-Q1 is a wide-voltage, high-power, four-channel half-bridge driver for various automotive applications. The device supports up to 60V supply voltage, and integrated MOSFETs with 50 mΩ on-resistance allow up to 5A current on each output.

The device can be used for driving up to four solenoids or valves, one stepper motor, two brushed-DC motors, one BLDC or PMSM motor and up to two thermoelectric coolers (Peltier elements). The output stage consists of N-channel power MOSFETs configured as four independent half-bridges, charge pump, current sensing and regulation circuits, current sense outputs and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the device to regulate the current when the load is connected from output to ground. A regulation current limit can be set with an adjustable external voltage reference (VREF). Additionally, the device provides four proportional current output pins, one for each half-bridge high-side FET. Optional external sense resistors can also be connected from the PGND pins to the system ground.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout, output over current, and device overtemperature.

特性 Features

• AEC-Q100 Qualified for Automotive
• Functional Safety-Capable
• Four-channel half-bridge driver
• 4.5V to 60V operating supply voltage range
• High current capacity: Up to 5A per output
• Up to four solenoids or valves
• Two brushed-DC motors
• One 3-phase brushless-DC motor
• Integrated current sense and regulation
• Sense outputs (IPROPI) for each half-bridge
• Optional external sense resistor
• Separate logic supply voltage (VCC)
• Programmable fault recovery method
• Low-current sleep mode (3µA)
• VM undervoltage lockout (UVLO)
• Overcurrent protection (OCP)
• Fault condition output (nFAULT)