DRV8301DCAR集成电路（IC）的电机驱动器控制器规格书PDF中文资料

DRV8301DCAR属于集成电路（IC）的电机驱动器控制器。由德州仪器制造生产的DRV8301DCAR电机驱动器，控制器产品属于电机驱动器和控制器电源管理集成电路 (PMIC) 系列，可用于控制或操作从某电源施加到电机或相关机电执行器的电源。所实现的具体功能和特性集根据预期负载和预期应用的特性有很大差异，范围从用于有刷电机的简单开环速度控制到基于步进电机的高级闭环运动控制。

1 Features

1• 6-V to 60-V Operating Supply Voltage Range

• 1.7-A Source and 2.3-A Sink Gate Drive Current

Capability

• Slew Rate Control for EMI Reduction

• Bootstrap Gate Driver With 100% Duty Cycle

Support

• 6- or 3-PWM Input Modes

• Dual Integrated Current Shunt Amplifiers With

Adjustable Gain and Offset

• Integrated 1.5-A Buck Converter

• 3.3-V and 5-V Interface Support

• SPI

• Protection Features:

– Programmable Dead Time Control (DTC)

– Programmable Overcurrent Protection (OCP)

– PVDD and GVDD Undervoltage Lockout

(UVLO)

– GVDD Overvoltage Lockout (OVLO)

– Overtemperature Warning/Shutdown

(OTW/OTS)

– Reported Through nFAULT, nOCTW, and SPI

Registers

2 Applications

• 3-Phase BLDC and PMSM Motors

• CPAPs and Pumps

• E-bikes

• Power Tools

• Robotics and RC Toys

• Industrial Automation

3 Description

The DRV8301 is a gate driver IC for three-phase

motor drive applications. The device provides three

half-bridge drivers, each capable of driving two Nchannel

MOSFETs. The DRV8301 supports up to

1.7-A source and 2.3-A peak current capability. The

DRV8301 can operate off of a single power supply

with a wide range from 6-V to 60-V. The device uses

a bootstrap gate driver architecture with trickle charge

circuitry to support 100% duty cycle. The DRV8301

uses automatic handshaking when the high-side or

low-side MOSFET is switching to prevent flow of

current. Integrated VDS sensing of the high-side and

low-side MOSFETs is used to protect the external

power stage against overcurrent conditions.

The DRV8301 includes two current shunt amplifiers

for accurate current measurement. The amplifiers

support bidirectional current sensing and provide an

adjustable output offset up to 3 V.

The DRV8301 also includes an integrated switching

mode buck converter with adjustable output and

switching frequency. The buck converter can provide

up to 1.5 A to support MCU or additional system

power needs.

The SPI provides detailed fault reporting and flexible

parameter settings such as gain options for the

current shunt amplifiers and slew rate control of the

gate drivers.