DRV594中文资料+/-3A 高效脉宽调制 (PWM) 功率驱动器数据手册TI规格书

描述 Description

The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier. The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurrent event has occurred. If the overcurrent circuitry is tripped, the devices automatically reset (see application information section for more details). The PWM switching frequency may be set to 500 kHz or 100 kHz depending on system requirements. To eliminate external components, the gain is fixed at 2.3 V/V for the DRV593. For the DRV594, the gain is fixed at 14.5 V/V.

特性 Features

• Operation Reduces Output Filter Size and Cost by 50% Compared to DRV591
• Low Supply Voltage Operation: 2.8 V to 5.5 V
• Overcurrent and Thermal Protection
• Two Selectable Switching Frequencies
• PWM Scheme Optimized for EMI
• APPLICATIONS
• Laser Diode Biasing

PowerPAD is a trademark of Texas Instruments