CY74FCT273TSOC.B中文资料德州仪器数据手册PDF规格书

Function, Pinout, and Drive Compatible

With FCT and F Logic

Reduced VOH (Typically = 3.3 V) Versions

of Equivalent FCT Functions

Edge-Rate Control Circuitry for

Significantly Improved Noise

Characteristics

Ioff Supports Partial-Power-Down Mode

Operation

Matched Rise and Fall Times

ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

Fully Compatible With TTL Input and

Output Logic Levels

CY54FCT273T

– 32-mA Output Sink Current

– 12-mA Output Source Current

CY74FCT273T

– 64-mA Output Sink Current

– 32-mA Output Source Current

description

The ’FCT273T devices consist of eight

edge-triggered D-type flip-flops with individual

D inputs and Q outputs. The common

buffered-clock (CP) and master-reset (MR) inputs

load and reset all flip-flops simultaneously. These

devices are edge-triggered registers. The state of

each D input (one setup time before the

low-to-high clock transition) is transferred to the

corresponding flip-flop’s Q output. All outputs are

forced low by a low logic level on the MR input.

This device is fully specified for

partial-power-down applications using Ioff. The Ioff

circuitry disables the outputs, preventing

damaging current backflow through the device

when it is powered down.