CS5529-AS集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

CS5529-AS属于集成电路（IC）的模数转换器（ADC）。由凌云逻辑制造生产的CS5529-AS模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

General Description

The 16-bit CS5529 is a low-power, programmable ∆Σ ADC (Analog-to-Digital Converter), which includes coarse/fine charge buffers, a fourth-order ∆Σ modulator, a calibration microcontroller, a digital filter with programmable decimation rates, a 6-bit output latch, and a threewire serial interface. The ADC is designed to operate from single or dual analog supplies and a single digital supply.

Features

● Delta-sigma Analog-to-digital Converter

- Linearity Error: 0.0015FS

- Noise-free Resolution: 16-Bits

● 2.5 V Bipolar/Unipolar Buffered Input Range

● 6-bit Output Latch

● Eight Digital Filters

- Selectable Output Word Rates

- Output Settles in One Conversion Cycle

- 50/60 Hz ±3 Hz Simultaneous Rejection

● Simple Three-wire Serial Interface

- SPI™ and Microwire™ Compatible

- Schmitt Trigger on Serial Clock (SCLK)

● System/Self-calibration with R/W Registers

● Power Supply Configurations

- VA+ = +5 V; VA- = 0 V; VD+ = +3 V to +5 V

- VA+ = +2.5 V; VA- = -2.5 V; VD+ = +3 V to +5 V

- VA+ = +3.0 V; VA- = -3.0 V; VD+ = +3.0 V

● Low Power Consumption: 2.6 mW