General Description

The 16-bit CS5525 and the 20-bit CS5526 are highly in tegrated ∆ΣA/D converters which include an instrumentation amplifier, a PGA (programmable gain amplifier), eight digital filters, and self and system calibration circuitry.

Features

● Delta-sigma A/D Converter

- Linearity Error: 0.0015FS

- Noise-free Resolution: 18-bits

● Bipolar/Unipolar Input Ranges

- 25 mV, 55 mV, 100 mV, 1 V, 2.5 V and 5 V

● Chopper Stabilized Instrumentation Amplifier

● On-chip Charge Pump Drive Circuitry

● 4 -bit Output Latch

● Simple three-wire serial interface

- SPI™ and Microwire™ Compatible

- Schmitt Trigger on Serial Clock (SCLK)

● Programmable Output Word Rates

- 3.76 Sps to 202 Sps (XIN = 32.768 kHz)

- 11.47 Sps to 616 Sps (XIN = 100 kHz)

● Output Settles in One Conversion Cycle

● Simultaneous 50/60 HzNoise Rejection

● System and Self-calibration with

Read/Write Registers

● Single +5 V Analog Supply

+3.0 V or +5 V Digital Supply

● Low-power Mode Consumption: 4.9 mW

- 1.8 mW in 1 V, 2.5 V, and 5 V Input Ranges

CS5526属于集成电路（IC） > 模数转换器（ADC）。凌云逻辑制造生产的CS5526模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。