丝印：CP；Package：SOT-23；Silicon Epitaxial Planar Transistor

FEATURES • Power dissipation: PCM=200mW APPLICATIONS • NPN Silicon Epitaxial Planar Transistor

文件：436.74 Kbytes 页数：4 Pages

BILIN

银河微电

丝印：CP；Package：SOD-123；3.3 To 48V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features Glass passivated chip 400W peak pulse power capability with a 10/1000us waveform Repetitive rate (duty cycle):0.01 Typical IR less than 1μA above 10V Excellent clamping capability Very fast response time High temperature soldering: 260℃/10s at terminals. Meet AEC-Q101 requirement

文件：3.27335 Mbytes 页数：6 Pages

UNSEMI

优恩半导体

丝印：CP；Package：DO-214AC；5.0 To 200V 600W Surface Mount Transient Voltage Suppressors (TVS)

Glass passivated chip 600W peak pulse power capability with a 10/1000us waveform Repetitive rate (duty cycle):0.01% Typical IR less than 1μA above 10V Excellent clamping capability Very fast response time High temperature soldering: 260°C/10s at terminals. RoHS compliant Features

文件：3.35089 Mbytes 页数：6 Pages

UNSEMI

优恩半导体

丝印：CP；Package：SOT353-1；Single D-type flip-flop; positive-edge trigger

1. General description The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are overvoltage tole

文件：218.22 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：CP；Package：TSSOP5；Single D-type flip-flop; positive-edge trigger

1. General description The 74AHC1G79-Q100; 74AHCT1G79-Q100 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are overvo

文件：218.37 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：CP；Package：TSSOP5；Single D-type flip-flop; positive-edge trigger

1. General description The 74AHC1G79-Q100; 74AHCT1G79-Q100 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are overvo

文件：242.38 Kbytes 页数：13 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：CP；Package：XSON5；Single D-type flip-flop; positive-edge trigger

1. General description The 74AHC1G79-Q100; 74AHCT1G79-Q100 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are overvo

文件：242.38 Kbytes 页数：13 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：Cp；Package：SSOP5；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：433.03 Kbytes 页数：18 Pages

ROHM

罗姆

丝印：Cp；Package：SSOP5；Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：433.03 Kbytes 页数：18 Pages

ROHM

罗姆

丝印：Cp；Package：SSOP5；High accuracy detection, Ultra-low current consumption

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：433.03 Kbytes 页数：18 Pages

ROHM

罗姆