CDCVF855PW集成电路（IC）的时钟发生器PLL频率合成器规格书PDF中文资料

CDCVF855PW属于集成电路（IC）的时钟发生器PLL频率合成器。由美国德州仪器公司制造生产的CDCVF855PW时钟发生器，PLL，频率合成器时钟发生器、PLL 和频率合成器集成电路 (IC) 可为逻辑器件提供参考信号的稳定定时脉冲，这些器件包括计算机、微控制器、数据通信系统和图形/视频发生器。这些集成电路可能包括缓冲器、驱动器、分频器、倍频器、多路复用器、合成器、扇出分配器和预分频器。

FEATURES

· Spread-Spectrum Clock Compatible

· Operating Frequency: 60 MHz to 220 MHz

· Low Jitter (Cycle-Cycle): ±60 ps (±40 ps at 200

MHz)

· Low Static Phase Offset: ±50 ps

· Low Jitter (Period): ±60 ps (±30 ps at 200 MHz)

· 1-to-4 Differential Clock Distribution (SSTL2)

· Best in Class for VOX = VDD/2 ±0.1 V

· Operates From Dual 2.6-V or 2.5-V Supplies

· Available in a 28-Pin TSSOP Package

· Consumes < 100-mA Quiescent Current

· External Feedback Pins (FBIN, FBIN) Are Used

to Synchronize the Outputs to the Input

Clocks

· Meets/Exceeds JEDEC Standard (JESD82-1)

For DDRI-200/266/333 Specification

· Meets/Exceeds Proposed DDRI-400

Specification (JESD82-1A)

· Enters Low-Power Mode When No CLK Input

Signal Is Applied or PWRDWN Is Low

APPLICATIONS

· DDR Memory Modules (DDR400/333/266/200)

· Zero-Delay Fan-Out Buffer

DESCRIPTION

The CDCVF855 is a high-performance, low-skew,

low-jitter, zero-delay buffer that distributes a

differential clock input pair (CLK, CLK) to 4

differential pairs of clock outputs (Y[0:3], Y[0:3]) and one differential pair of feedback clock outputs

(FBOUT, FBOUT). The clock outputs are controlled

by the clock inputs (CLK, CLK), the feedback clocks

(FBIN, FBIN), and the analog power input (AVDD).

When PWRDWN is high, the outputs switch in phase

and frequency with CLK. When PWRDWN is low, all

outputs are disabled to a high-impedance state

(3-state) and the PLL is shut down (low-power

mode). The device also enters this low-power mode

when the input frequency falls below a suggested

detection frequency that is below 20 MHz (typical 10

MHz). An input frequency-detection circuit detects

the low-frequency condition and, after applying a

>20-MHz input signal, this detection circuit turns the

PLL on and enables the outputs.

When AVDD is strapped low, the PLL is turned off

and bypassed for test purposes. The CDCVF855 is

also able to track spread-spectrum clocking for

reduced EMI.

Because the CDCVF855 is based on PLL circuitry, it

requires a stabilization time to achieve phase-lock of

the PLL. This stabilization time is required following

power up. The CDCVF855 is characterized for both

commercial and industrial temperature ranges.