CC2540数据手册开发板套件编程器的射频评估开发套件开发板规格书PDF

描述 Description

The CC2540 is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The CC2540 combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful supporting features and peripherals. The CC2540 is suitable for systems where very low power consumption is required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption.The CC2540 comes in two different versions: CC2540F128/F256, with 128 and 256 KB of flash memory, respectively.Combined with the Bluetooth low energy protocol stack from Texas Instruments, the CC2540F128/F256 forms the market’s most flexible and cost-effective single-mode Bluetooth low energy solution.

The CC2540 is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The CC2540 combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful supporting features and peripherals. The CC2540 is suitable for systems where very low power consumption is required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption.The CC2540 comes in two different versions: CC2540F128/F256, with 128 and 256 KB of flash memory, respectively.Combined with the Bluetooth low energy protocol stack from Texas Instruments, the CC2540F128/F256 forms the market’s most flexible and cost-effective single-mode Bluetooth low energy solution.

特性 Features

• True Single-Chip BLE Solution: CC2540 Can Run Both Application and BLE Protocol Stack, Includes Peripherals to Interface With Wide Range of Sensors, Etc.
• 6-mm × 6-mm Package
• RF
• Bluetooth low energy technology Compatible
• Excellent Link Budget (up to 97 dB), Enabling Long-Range Applications Without External Front End
• Accurate Digital Received Signal-Strength Indicator (RSSI)
• Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)

• Layout
• Few External Components
• Reference Design Provided
• 6-mm × 6-mm QFN40 Package

• Low Power
• Active Mode RX Down to 19.6 mA
• Active Mode TX (–6 dBm): 24 mA
• Power Mode 1 (3-µs Wake-Up): 235 µA
• Power Mode 2 (Sleep Timer On): 0.9 µA
• Power Mode 3 (External Interrupts): 0.4 µA
• Wide Supply Voltage Range (2 V–3.6 V)
• Full RAM and Register Retention in All Power Modes

• TPS62730 Compatible Low Power in Active Mode
• RX Down to 15.8 mA (3 V Supply)
• TX (-6 dBm): 18.6 mA (3 V Supply)

• Microcontroller
• High-Performance and Low-Power 8051 Microcontroller Core
• In-System-Programmable Flash, 128 KB or 256 KB
• 8-KB SRAM

• Peripherals
• 12-Bit ADC with Eight Channels and Configurable Resolution
• Integrated High-Performance Op-Amp and Ultralow-Power Comparator
• General-Purpose Timers (One 16-Bit, Two 8-Bit)
• 21 General-Purpose I/O Pins (19× 4 mA, 2× 20 mA)
• 32-kHz Sleep Timer With Capture
• Two Powerful USARTs With Support for Several Serial Protocols
• Full-Speed USB Interface
• IR Generation Circuitry
• Powerful Five-Channel DMA
• AES Security Coprocessor
• Battery Monitor and Temperature Sensor
• Each CC2540 Contains a Unique 48-bit IEEE Address

• Software Features
• Bluetooth v4.0 Compliant Protocol Stack for Single-Mode BLE Solution
• Complete Power-Optimized Stack, Including Controller and Host
• GAP – Central, Peripheral, Observer, or Broadcaster (Including Combination Roles)
• ATT / GATT – Client and Server
• SMP – AES-128 Encryption and Decryption
• L2CAP

• Sample Applications and Profiles
• Generic Applications for GAP Central and Peripheral Roles
• Proximity, Accelerometer, Simple Keys, and Battery GATT Services

• Multiple Configuration options
• Single-Chip Configuration, Allowing Application to Run on CC2540
• Network Processor Interface for Applications Running on an External Microcontroller

• BTool – Windows PC Application for Evaluation, Development, and Test

• Development Tools
• CC2540 Mini Development Kit
• SmartRF Software
• Supported by IAR Embedded Workbench Software for 8051


• APPLICATIONS
• 2.4-GHz Bluetooth low energy Systems
• Mobile Phone Accessories
• Sports and Leisure Equipment
• Consumer Electronics
• Human Interface Devices (Keyboard, Mouse, Remote Control)
• USB Dongles
• Health Care and Medical

• CC2540 with TPS62730
• TPS62730 is a 2 MHz Step Down Converter with Bypass Mode
• Extends Battery Lifetime by up to 20%
• Reduced Current in TX and RX
• 30 nA Bypass Mode Current to Support Low Power Modes
• RF Performance Unchanged
• Small Package Allows for Small Solution Size
• CC2540 Controllable

All other trademarks are the property of their respective owners