CC2533中文资料用于 2.4GHz IEEE 802.15.4 和 ZigBee 应用的真正的片上系统解决方案数据手册TI规格书

描述 Description

The CC2533 is an optimized system-on-chip (SoC) solution for IEEE 802.15.4 based remote-control systems. It enables single-chip remote controls to be built with low bill-of-material cost when used as a flexible SoC. It also provides a simple path to adding RF4CE capability to a device or target when used in the wireless network processor configuration of the RemoTI RF4CE stack. Robust network nodes can be built with very low total bill-of-material costs.
The CC2533 combines the excellent performance of a leading RF transceiver with a single-cycle 8051 compliant CPU, up to 96-KB in-system programmable flash memory, up to 6-KB RAM, and many other powerful features. The CC2533 has efficient power modes with RAM and register retention below 1 µA, making it highly suited for low-duty-cycle systems where ultralow power consumption is required. Short transition times between operating modes further ensure low energy consumption.
Combined with the golden-unit-status RemoTI stack from Texas Instruments, the CC2533 provides a robust and complete ZigBee RF4CE remote-control solution. It is also ideal for implementing the target side of a remote-control system in a network processor configuration with an SPI/UART/I2C interface. The CC2533 comes complete with reference designs and example software that implement a remote control system to ensure efficient design-in.
The CC2533 exists in three memory-size configurations:
CC2533F32 – 32-KB Flash, 4-KB RAM
CC2533F64 – 64-KB Flash, 4-KB RAM
CC2533F96 – 96-KB Flash, 6-KB RAM

特性 Features

• RF/Layout
• Excellent Receiver Sensitivity and Robustness to Interference
• Boost-Mode TX at 7 dBm
• Only a Single Crystal Needed for Asynchronous Networks
• Suitable for Systems Targeting Compliance With Worldwide Radio-Frequency Regulations: ETSI EN 300 328 and EN 300 440 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan)
• Low Power
• Active Mode TX at 0 dBm (CPU Idle): 28.5 mA
• Power Mode 2 (Sleep Timer Running): 1 µA
• Wide Supply-Voltage Range (2 V–3.6 V)
• 64- or 96-KB In-System-Programmable Flash
• Hardware Debug Support
• IEEE 802.15.4 MAC Timer, General-Purpose Timers (One 16-Bit, Two 8-Bit)
• 32-kHz Sleep Timer With Capture
• Accurate Digital RSSI/LQI Support
• Random Number Generation
• Two Powerful USARTs With Support for UART and SPI
• 23 General-Purpose I/O Pins
• Development Tools
• CC2533 Development Kit
• SmartRF™ Software
• IAR Embedded Workbench™ Available
• 2.4-GHz IEEE 802.15.4 Systems Based on TIMAC or SimpliciTI™ Network Protocol
• Electronic Shelf Labeling