11-bit DDR2 SDRAM MUX/bus switch with 12 廓 ON resistance

General description This 11-bit bus switch is designed for 1.7 V to 1.9 V VDD operation and SSTL_18 select input levels. Each Host port pin (HPn) is multiplexed to one of four DIMM port pins (xDPn). The selection of the DIMM port to be connected to the Host port is controlled by a decoder dri

文件：178.26 Kbytes 页数：21 Pages

恩XP

11-bit DDR2 SDRAM MUX/bus switch with 12 廓 ON resistance

General description This 11-bit bus switch is designed for 1.7 V to 1.9 V VDD operation and SSTL_18 select input levels. Each Host port pin (HPn) is multiplexed to one of four DIMM port pins (xDPn). The selection of the DIMM port to be connected to the Host port is controlled by a decoder dri

文件：178.26 Kbytes 页数：21 Pages

恩XP

11-bit DDR2 SDRAM MUX/bus switch with 12 W ON resistance

文件：115.27 Kbytes 页数：20 Pages

恩XP

11-bit DDR2 SDRAM MUX/bus switch with 12 ohm ON resistance

文件：178.26 Kbytes 页数：21 Pages

PHI

飞利浦

具有12Ω导通电阻的11位DDR2 SDRAM MUX/总线开关

This 11-bit bus switch is designed for 1.7 V to 1.9 V VDD operation and SSTL_18 selectinput levels.\nEach Host port pin (HPn) is multiplexed to one of four DIMM port pins (xDPn). Theselection of the DIMM port to be connected to the Host port is controlled by a decoderdriven by three hardware select • Enable (EN) and select signals (S0, S1) are SSTL_18 compatible\n• Optimized for use in Double Data Rate 2 (DDR2) SDRAM applications\n• Suitable to be used with 400 Mbit/s to 800 Mbit/s, 200 MHz to 400 MHz DDR2 data bus\n• Switch ON-resistance is designed to eliminate the need for series resistor t;

恩XP