CBM53D14AMS

四通道、电压输出10位DAC; • CBM5314:4 buffered 10-Bit DACs in MSOP10L  QFN10\n• CBM5324:4 buffered 12-Bit DACs in MSOP10L  QFN10\n• Low power operation: 500uA @ 3V,600uA @ 5V\n• 2.5V to 5.5V power supply\n• Power-down to 80nA @ 3V,200nA @ 5V\n• Double-buffered input logic\n• Output range:0V to\n• Power-on reset to 0V\n• On-chip, rail-to-rail output buffer amplifiers\n• Temperature range -40℃ to +105℃\n;

The CBM53D14/CBM53D24 are quad 10- and 12-bit buffered voltage output DACs in MSOP10L packages that operate from a single 2.5V to 5.5V supply, consuming only 500uA at 3V. They have on-chip rail-to-rail output amplifiers with slew rate of 0.7V/us. A 3-wire serial interface compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards is used, which can operates at clock rates up to 30MHz.\n\n The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneous. It incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0V and remains there until a valid write takes place to the device. The parts contain a power-down feature that reduces the current consumption to 200nA @ 5V (80nA @ 3V).\n\n\n\n\n\n

CBM53D14AMS

丝印：53D14A；Package：MSOP-10；OPERATION INSTRUCTION

CBM53D14

OPERATIONINSTRUCTION

CBM53D14AQF

OPERATIONINSTRUCTION

CBM53D14BMS

OPERATIONINSTRUCTION

CBM53D14BQF

OPERATIONINSTRUCTION