Catalyst Semiconductor

I2C Interfaced 16-bit LED Dimmer, I2C Interfaced 16-bit LED Blinker Features ■ 256 discrete brightness steps for easy LED dimming and color mixing ■ two programmable blinking rate between 0.625 sec and 1.6 sec for CAT9532; 0.02sec and 6.4 sec for CAT9552 ■ eliminates repeated command

文件：867.83 Kbytes 页数：28 Pages

Catalyst

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

DESCRIPTION The CAT5259 is four digitally programmable poten– tiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are

文件：730.65 Kbytes 页数：16 Pages

ONSEMI

安森美半导体

Quad Digitally Programmable Potentiometers (DPP) with 256 Taps and 2-wire Interface

文件：137.18 Kbytes 页数：16 Pages

Catalyst

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

文件：283.01 Kbytes 页数：16 Pages

Catalyst

Quad Digital Potentiometer (POT)

文件：211.04 Kbytes 页数：15 Pages

ONSEMI

安森美半导体

数字电位计 (POT)，256 抽头，NV，四路，I2C

The CAT5259 is four digital POTs integrated with control logic and 16 bytes of NVRAM memory. Each digital POT consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS • Four linear taper digital potentiometers\n• 256 resistor taps per potentiometer\n• End to end resistance 50 kΩ or 100 kΩ\n• Potentiometer control and memory access via 2-wire interface (I²C like)\n• Low wiper resistance, typically 100 Ω\n• Nonvolatile memory storage for up to four wiper settings f;

ONSEMI

安森美半导体

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

DESCRIPTION The CAT5259 is four digitally programmable poten– tiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are

文件：730.65 Kbytes 页数：16 Pages

ONSEMI

安森美半导体

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

DESCRIPTION The CAT5259 is four digitally programmable poten– tiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are

文件：730.65 Kbytes 页数：16 Pages

ONSEMI

安森美半导体

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

DESCRIPTION The CAT5259 is four digitally programmable poten– tiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are

文件：730.65 Kbytes 页数：16 Pages

ONSEMI

安森美半导体

Quad Digitally Programmable Potentiometers (DPP?? with 256 Taps and I짼C Interface

DESCRIPTION The CAT5259 is four digitally programmable poten– tiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are

文件：730.65 Kbytes 页数：16 Pages

ONSEMI

安森美半导体