Smart Highside Power Switch (Overload protection Current limitation Short-circuit protection Thermal shutdown)

General Description N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, integrated in Smart SIPMOSâ chip on chip technology. Fully protected by embedded protection functions. Features • Overload protection • Current limitation • Shor

文件：279.82 Kbytes 页数：13 Pages

SIEMENS

西门子

Smart Highside Power Switch (Overload protection Current limitation Short-circuit protection Thermal shutdown)

General Description N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, integrated in Smart SIPMOSâ chip on chip technology. Fully protected by embedded protection functions. Features ● Overload protection ● Current limitation ● Shor

文件：277.02 Kbytes 页数：13 Pages

SIEMENS

西门子

CMOS compatible parallel input pins for four channels

文件：2.624 Mbytes 页数：71 Pages

Infineon

英飞凌

SPI Power Controller

文件：2.83706 Mbytes 页数：69 Pages

Infineon

英飞凌

SPI Power Controller

文件：2.83706 Mbytes 页数：69 Pages

Infineon

英飞凌

CMOS compatible parallel input pins for two channels

文件：2.67288 Mbytes 页数：72 Pages

Infineon

英飞凌

SPI Power Controller

文件：2.8882 Mbytes 页数：70 Pages

Infineon

英飞凌

SPI Power Controller

文件：2.8882 Mbytes 页数：70 Pages

Infineon

英飞凌

多通道SPI高边功率控制器 | SPOC™

The BTS54220-LBB is a four channel high-side smart power switch in TSON-24-1 package providing embedded protective functions. It is specially designed to control standard exterior lighting in automotive applications. In order to use the same hardware, the device can be configured to bulb or LED mode ·8-bit serial peripheral interface (daisy chain capable SPI) for control and diagnosis.\n ·PWM driving possible through direct inputs or via SPI\n ·Selectable AND-/ OR- combination for the parallel inputs (PWM control)\n ·Load type configuration via SPI (bulb or LEDs)\n ·Lead Tip Inspection (LTI;

Infineon

英飞凌

多通道SPI高边功率控制器 | SPOC™

The BTS54220-LBE is a four channel high-side smart power switch in TSON-24-1 package providing embedded protective functions. It is specially designed to control standard exterior lighting in automotive applications. In order to use the same hardware, the device can be configured to bulb or LED mode · 8-bit serial peripheral interface (daisy chain capable SPI) for control and diagnosis.\n · PWM driving possible through direct inputs or via SPI\n · Integrated control for one external smart power switch  Selectable AND-/ OR- combination for the parallel inputs (PWM control)\n · Load type confi;

Infineon

英飞凌