BQ25308中文资料德州仪器数据手册PDF规格书
BQ25308规格书详情
1 Features
• Standalone charger and easy to configure
• High-efficiency, 1.2MHz, synchronous switch-mode
buck charger
– 92.5 charge efficiency at 2A from 5V input for
1-cell battery
– 91.8 charge efficiency at 2A from 9V input for
1-cell battery
• Single input to support USB input and high voltage
adaptors
– Supports 4.1V - 17V input voltage range with
28V absolute maximum input voltage rating
– Input Voltage Dynamic Power Management
(VINDPM) tracking battery voltage
• High integration
– Integrated reverse blocking and synchronous
switching MOSFET
– Internal input and charge current sense
– Internal loop compensation
– Integrated bootstrap diode
• 3.6V / 4.05V / 4.15V / 4.2V charge voltage
• 3.0A maximum fast charge current
• 200nA low battery leakage current at 4.5V VBAT
• 4.25μA VBUS supply current in IC disable mode
• Charge current thermal regulation at 120°C
• Precharge current: 10 of fast charge current
• Termination current: 10 of fast charge current
• Charge accuracy
– ±0.5 charge voltage regulation
– ±10 charge current regulation
• Safety
– Disable charge for dead battery condition
– Thermal regulation and thermal shutdown
– Input Under-Voltage Lockout (UVLO) and Over-
Voltage Protection (OVP)
– Battery overcharge protection
– Safety timer for precharge and fast charge
– Charge disabled if current setting pin ICHG is
open or short
– Cold/hot battery temperature protection
– Fault report on STAT pin
• Available in a WQFN 3x3-16 package
2 Applications
• Wireless speaker
• Barcode scanner
• Gaming
• Cradle charger
• Cordless power tool
• Building automation
• Medical
3 Description
The BQ25308 is a highly-integrated standalone
switch-mode battery charger for 1-cell Li-ion, Lipolymer,
and LiFePO4 batteries. The BQ25308
supports 4.1V to 17V input voltage and 3A fast charge
current. The integrated current sensing topology of
the device enables high charge efficiency and low
BOM cost. The best-in-class 200nA low quiescent
current of the device conserves battery energy and
maximizes the shelf time for portable devices. The
BQ25308 is available in a 3x3 WQFN package for
easy 2-layer layout and space limited applications.
The BQ25308 supports a 4.1V to 17V input to charge single cell batteries. The BQ25308 provides up to 3A
continuous charge current to a single cell 1S battery. The device features fast charging for portable devices. Its
input voltage regulation delivers maximum charging power to the battery from the input source. The solution is
highly integrated with an input reverse-blocking FET (RBFET, Q1), high-side switching FET (HSFET, Q2), and
low-side switching FET (LSFET, Q3). The device also provides a safety feature that completely inhibits charging
of a dead battery.
The BQ25308 features lossless integrated current sensing to reduce power loss and BOM cost with
minimized component count. It also integrates a bootstrap diode for the high-side gate drive and battery
temperature monitor to simplify system design. The device initiates and completes a charging cycle without
host control. The BQ25308 charge voltage and charge current are set by external resistors. The BQ25308
detects the charge voltage setting at startup and charges the battery in four phases: battery short, preconditioning,
constant current, and constant voltage. At the end of the charging cycle, the charger automatically
terminates if the charge current is below the termination current threshold and the battery voltage is
above the recharge threshold. When the battery voltage falls below the recharge threshold, the charger will
automatically start another charging cycle. The charger provides various safety features for battery charging and
system operations, including battery temperature monitoring based on negative temperature coefficient (NTC)
thermistor, charge safety timer, input over-voltage and over-current protections, as well as battery over-voltage
protection. Pin open and short protection is also built in to protect against the charge current setting pin ICHG
accidently open or short to GND. The thermal regulation regulates charge current to limit die temperature during
high power operation or high ambient temperature conditions.
The STAT pin output reports charging status and fault conditions. When the input voltage is removed, the device
automatically enters HiZ mode with very low leakage current from battery to the charger device. The BQ25308 is
available in a 3mm x 3mm thin WQFN package.
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
TI |
2016+ |
QFN16 |
3000 |
主营TI,绝对原装,假一赔十,可开17%增值税发票! |
询价 | ||
TI/德州仪器 |
12+ |
* |
12 |
询价 | |||
TI/德州仪器 |
2023+ |
QFN16 |
6895 |
原厂全新正品旗舰店优势现货 |
询价 | ||
TI/德州仪器 |
2410+ |
SOP |
9000 |
十年芯路!只做原装!一直起卖! |
询价 | ||
0 |
2122+ |
9880 |
全新原装正品现货,优势渠道可含税,假一赔十 |
询价 | |||
Texas Instruments |
23+/24+ |
16-WFQFN |
8600 |
只供原装进口公司现货+可订货 |
询价 | ||
TI/德州仪器 |
QFN16 |
货真价实,假一罚十 |
25000 |
询价 | |||
TexasInstruments |
18+ |
ICENERGYHARVCTRLRBATT16Q |
6580 |
公司原装现货/欢迎来电咨询! |
询价 | ||
TI |
1725+ |
QFN16 |
7500 |
只做原装进口,假一罚十 |
询价 | ||
TI |
16+ |
VQFN |
10000 |
原装正品 |
询价 |