1200V驱动IC IGBT & SiC驱动IC解决方案

BF1181是用于SIC mosfet和igbt的电隔离单通道栅极驱动器。互补输入与5V信号兼容，可直接连接到微控制器。对于输出，驱动峰值电流可达±8A。BF1181提供了去饱和保护、输入输出侧电源UVLO、故障报告、主动米勒箝位和模拟电压采样等功能，使系统运行安全，简化了系统设计。 • AEC-Q100符合汽车应用要求\n• 高达1200V的SiC mosfet和igbt\n• 100KV/μs最小CMTI\n• 8A驱动输出\n• 内置主动铣刀夹\n• 内置去饱和保护\n• 内置输入和输出侧电源UVLO\n• 内置软关闭\n• SOW16包;

BYD

比亚迪半导体

1200V驱动IC IGBT & SiC驱动IC解决方案

BYD

比亚迪半导体

4-port Ethernet Over SDH Mapping Device

FEATURES Supports up to four ports of full-duplex10/100 Mbit/s Ethernet or a single port of full-duplex 1000 Mbit/s Ethernet with standards-compliant flow control supported: 10/100 Mbit/s Ethernet interface supports SMII and SS-SMII 1000 Mbit/s Ethernet interface supports GMII Ethernet Manage

文件：129.039 Kbytes 页数：3 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

STM-1/4 Single Chip Add/Drop Multiplexer System device

FEATURES SDH Overhead Processor ♦ Dual channel SDH STM-4 or STM-1 Serial LVDS interfaces ♦ Dual channel multi-rate CDR macro is integrated ♦ High jitter performance complies with ITU-T specification ♦ Regenerator and multiplex section overheads are terminated ♦ High order AU-4 pointer interp

文件：124.82 Kbytes 页数：2 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

STM-1 Single Chip Add/Drop Multiplexer System device

FEATURES Dual SDH STM-1 serial LVPCEL interfaces Integrated two-channel CDR macros to interface directly with an optical module Fully compliant with ITU-T specifications for Jitter Tolerance, Transfer and Generation Regenerator and multiplexer section termination High order processing for A

文件：115.9 Kbytes 页数：2 Pages

ETCList of Unclassifed Manufacturers

未分类制造商