EPITAXIAL-BASE,SILICON N-P-N AND P-N-P VERSAWATT TRANSISTORS

Epitaxial-Base, Silicon N-P-N and P-N-P VERSAWATT Transistors

文件：138.09 Kbytes 页数：3 Pages

INTERSIL

isc Silicon PNP Power Transistor

DESCRIPTION • Collector-Emitter Sustaining Voltage- : VCEO(SUS) = -80V(Min) • Low Saturation Voltage • Complement to Type BD799 APPLICATIONS • Designed for a wide variety of medium-power switching and amplifier applications , such as series and shunt regulators and driver and output stages of

文件：103.44 Kbytes 页数：2 Pages

ISC

无锡固电

Silicon PNP Power Transistor

DESCRIPTION • Collector-Emitter Sustaining Voltage- : VCEO(SUS) = -80V(Min) • Low Saturation Voltage • Complement to Type BD799 APPLICATIONS • Designed for a wide variety of medium-power switching and amplifier applications , such as series and shunt regulators and driver and output stages of

文件：128.82 Kbytes 页数：2 Pages

NJSEMINew Jersey Semi-Conductor Products, Inc.

新泽西半导体新泽西半导体公司

Trans GP BJT PNP 80V 8A

NJS

新泽西半导体

For Automotive 500 mA Adjustable Output LDO Regulators

General Description The BD800M5Wxxx-C series are linear regulators designed as low current consumption products for power supplies in various automotive applications. These products are designed for up to 45 V as an absolute maximum voltage and to operate until 500 mA for the output current

文件：1.78933 Mbytes 页数：42 Pages

ROHM

罗姆

For Automotive 500 mA Adjustable Output LDO Regulators

General Description The BD800M5Wxxx-C series are linear regulators designed as low current consumption products for power supplies in various automotive applications. These products are designed for up to 45 V as an absolute maximum voltage and to operate until 500 mA for the output current

文件：1.78933 Mbytes 页数：42 Pages

ROHM

罗姆

For Automotive 500 mA Adjustable Output LDO Regulators

General Description The BD800M5Wxxx-C series are linear regulators designed as low current consumption products for power supplies in various automotive applications. These products are designed for up to 45 V as an absolute maximum voltage and to operate until 500 mA for the output current

文件：1.78933 Mbytes 页数：42 Pages

ROHM

罗姆

车载用500mA可变输出LDO稳压器

BD800M5Wxxx-C是低功耗电流线性稳压器，适合蓄电池直连的车载系统。本IC的规格为45V耐压、输出电流500mA、消耗电流17µA。输出电压精度：BD800M5WFPJ-C、BD800M5WHFP-C为±2%、BD800M5WFP2-C为±2.5%（不包括反馈电阻的精度。）。通过在ADJ端子上连接电阻，可在1.2V～16V的范围内设置输出电压。具备输出关断功能，在向EN端子施加HIGH电压时，IC输出ON。施加LOW电压时，输出OFF。本IC内置防止因输出短路等发生IC破坏的过流保护电路、以及防止因过负荷状态等使IC发生热破坏的过热保护电路。输出相位补偿电容器可使用低E • AEC-Q100 Qualified (Grade 1)\n• EN Function (Output Shutdown Function)\n• Over Current Protection (OCP)\n• Thermal Shutdown Protection (TSD);

ROHM

罗姆

车载用500mA可变输出型LDO稳压器

BD800M5WHFP-C/BD800M5WFP2-C是一款低消耗电流的线性稳压器，适用于直接连接电池的车载系统。该IC具有45V耐压，500mA输出电流，17μA（Typ）消耗电流。 BD800M5WHFP-C的输出电压精度为±2％，BD800M5WFP2-C的输出电压精度为±2.5％。通过在ADJ引脚上连接一个电阻，输出电压可以在1.2V和16V之间设置。另外，还有输出关断功能，当EN引脚施加HIGH电压时，IC输出开启。施加LOW电压时输出关闭。该IC具有过流保护功能，用于防止因输出短路等原因导致IC损坏，还内置过热保护电路，用于防止IC因过载等原因造成热损坏。输出相位补偿电容器可使用低 • AEC-Q100 Qualified (Grade 1)\n• EN Function (Output Shutdown Function)\n• Over Current Protection (OCP)\n• Thermal Shutdown Protection (TSD);

ROHM

罗姆

Package：TO-252-5，DPak（4 引线 + 接片），TO-252AD；包装：管件 类别：集成电路（IC） 线性 + 开关稳压器 描述：IC REG LIN POS ADJ 500MA TO252

ROHM

罗姆