Switching regulator for DC / DC Converters

Switching regulator for DC / DC Converters The BA9700A, BA9700AF and BA9700AFV are switching regulators that use a pulse width modulation (PWM) system. They use a transistor switch to stabilize the output voltage. By the use of the transistor, power loss is decreased, fluctuation efficiency i

文件：141.53 Kbytes 页数：7 Pages

ROHM

罗姆

Switching regulator for DC / DC Converters

Switching regulator for DC / DC Converters The BA9700A, BA9700AF and BA9700AFV are switching regulators that use a pulse width modulation (PWM) system. They use a transistor switch to stabilize the output voltage. By the use of the transistor, power loss is decreased, fluctuation efficiency i

文件：141.53 Kbytes 页数：7 Pages

ROHM

罗姆

Switching regulator for DC / DC Converters

Switching regulator for DC / DC Converters The BA9700A, BA9700AF and BA9700AFV are switching regulators that use a pulse width modulation (PWM) system. They use a transistor switch to stabilize the output voltage. By the use of the transistor, power loss is decreased, fluctuation efficiency i

文件：141.53 Kbytes 页数：7 Pages

ROHM

罗姆

4-channel switching regulator

4-channel switching regulator The BA9707KV, a 4-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel PNP transistors directly.
Features 1) Reference voltage precision is ±1. 2) Output stages are based on the push-pull method (resemblin

文件：157.19 Kbytes 页数：6 Pages

ROHM

罗姆

4-channel switching regulator

4-channel switching regulator The BA9707KV, a 4-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel PNP transistors directly.
Features 1) Reference voltage precision is ±1. 2) Output stages are based on the push-pull method (resemblin

文件：157.19 Kbytes 页数：6 Pages

ROHM

罗姆

3-channel switching regulator

3-channel switching regulator The BA9708K, a 3-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel
Features 1) Reference voltage precision is ± 1. 2) Output stages are based on the push-pull method(resembling the totem-pole method), and O

文件：158.33 Kbytes 页数：6 Pages

ROHM

罗姆

3-channel switching regulator

3-channel switching regulator The BA9708K, a 3-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel
Features 1) Reference voltage precision is ± 1. 2) Output stages are based on the push-pull method(resembling the totem-pole method), and O

文件：158.33 Kbytes 页数：6 Pages

ROHM

罗姆

4-channel switching regulator

The BA9710KV, a 4-channel switching regulator that uses a pulse width modulation (PWM) system, can drive all channel PNP transistors directly. Channels 2 and 3 can be used for motor control because protection circuits are not built in. ● Features 1) Reference voltage precision is ±1. 2) Output

文件：153.65 Kbytes 页数：6 Pages

ROHM

罗姆

6-channel switching regulator controller

The BA9736KV is a 6-channel controller that includes all of the circuits required to construct a switching regulator. The circuits on the chip include a triangular-wave generator, a reference voltage circuit, an error amplifier, a PWM comparator, a pseudo-totem-pole driver, and a variety of protec

文件：175.82 Kbytes 页数：10 Pages

ROHM

罗姆

6-channel switching regulator controller

The BA9736KV is a 6-channel controller that includes all of the circuits required to construct a switching regulator. The circuits on the chip include a triangular-wave generator, a reference voltage circuit, an error amplifier, a PWM comparator, a pseudo-totem-pole driver, and a variety of protec

文件：175.82 Kbytes 页数：10 Pages

ROHM

罗姆