30W, 4.5V to 26V, High efficiency Stereo Class D Audio Amplifier with Low Idle Power Dissipation

AW83118G is a stereo efficient, Class-D audio power amplifier for driving speakers up to 60W/4Ω in PBTL mode. It can run 2×30W/8Ω without heat sink on a dual layer PCB. In Low-Loss mode, it consumes a low idle current, allowing for longer audio play and improved thermal performance in Speaker bar an Wide Voltage Range: 4.5V - 26VOutput Power: -\tBTL mode: 2×30W@8Ω, 24V,THD+N<1%-\tPBTL mode: 1×60W@4Ω, 24V,THD+N<1%Low THD+N: 0.03% at 1W, 1kHz input, 8Ω17mA Idle Current in Low-Loss ModeOverall efficiency up to 94%Multiple switching frequencies-\tAM avoidance-\tMaster/Slave synchron;

Awinic

艾为电子

30W, 4.5V to 26V, High efficiency Stereo Class D Audio Amplifier with Low Idle Power Dissipation

AW83118 is a stereo efficient, Class-D audio power amplifier for driving speakers up to 60W/4Ω in PBTL mode. It can run 2×30W/8Ω without heat sink on a dual layer PCB. In Low-Loss mode, it consumes a low idle current, allowing for longer audio play and improved thermal performance in Speaker bar and • Wide Voltage Range: 4.5V 26V\n• Low THD+N: 0.03% at 1W, 1kHz input, 8Ω\n• Overal• efficiency up to 94%\n• Programmable Power Limit\n• Support paralle• BTL Mode and MONO Mode\n• ETSSOP 11mm×8.1mm 32L Package;

Awinic

艾为电子

High-efficiency Step-up Switching Regulator with Built-in Power MOSFET

General Description BD8311NUV is a high-efficiency step-up switching regulator with built-in power MOSFET that can output 8V or 10V from a 4-battery voltage supply such as Li2cell or a 5V fixed power supply line. The built-in 80mΩ N-Channel FET switch is capable of handling output current up to 2

文件：458.19 Kbytes 页数：16 Pages

ROHM

罗姆

High-efficiency Step-up Switching Regulator with Built-in Power MOSFET

文件：389.55 Kbytes 页数：15 Pages

ROHM

罗姆

Integrated 2.5A MOSFET 1ch Boost Converter

文件：1.15185 Mbytes 页数：25 Pages

ROHM

罗姆