ATA6563数据手册集成电路（IC）的驱动器接收器收发器规格书PDF

描述 Description

The Microchip ATA6563 is a high-speed CAN FD transceiverthat provides an interface between a controller area network (CAN)protocol controller and the physical two-wire CAN bus. The transceiveris designed for high-speed (up to 5Mbit/s) CAN applications in theautomotive industry, providing differential transmit and receivecapability to (a microcontroller with) a CAN protocol controller. Itoffers improved electromagnetic compatibility (EMC) and electrostaticdischarge (ESD) performance, as well as features such as: Ideal passive behavior to the CAN bus when the supply voltage is off Direct interfacing to microcontrollers with supply voltages from 3V to 5VTwo operating modes (Standby and Normal Mode) together with the dedicated fail-safe features make the Atmel. ATA6563 an excellent choice for all types of high- speed CAN networks, especially in nodes requiring low-power mode with wake-up capability via the CAN bus.The ATA6563 is automotive Grade 0 qualified for an ambient temperature range from -40° to 150°C.To purchase the ATA6563 or obtain additional information, please contact any Microchip sales representative or authorized worldwide distributor.Please see our MikroElektronika click Board! https://www.mikroe.com/ata6563-click

特性 Features

Fully ISO 11898-2, ISO 11898-5, ISO 11898-2: 2016 and SAE J2962-2 compliant
ISO 26262 FuSa Ready
CAN FD - communication speed up to 5Mbit/s
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Differential receiver with wide common mode range
Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Remote wake-up capability via CAN bus - Wake-Up on Pattern (WUP), as Specified in ISO 11898-2: 2016, 3.8 μs Activity Filter Time
Functional behavior predictable under all supply conditions
Transceiver disengages from the bus when not powered up
RXD recessive clamping detection
High electrostatic discharge (ESD) handling capability on the bus pins
Bus pins protected against transients in automotive environments
Transmit data (TXD) dominant time-out function
Undervoltage detection on VCC
CANH/CANL short-circuit and overtemperature protected
AEC-Q100 and AEC-Q006
Packages: SO8, VDFN8 with wettable flanks (Moisture Sensitivity Level 1)
Built-in Safety FeaturesPower-on Reset (POR)
Voltage Monitoring (VCC, VIO)
Overtemperature Detection
RXD Recessive clamp detection
TXD Dominant Timeout

简介

ATA6563属于集成电路（IC）的驱动器接收器收发器。由制造生产的ATA6563驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。