ATA6504数据手册Microchip中文资料规格书

描述 Description

The ATA6504 is a CAN FD System Basis Chip (SBC) with a fully integrated high-speed CAN FD transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus and a low-drop voltage regulator (5V/150 mA). The transceiver is designed for high-speed CAN 2.0 and CAN FD (up to 8 Mbit/s) applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The combination of a voltage regulator and CAN FD transceiver makes it possible to develop simple but powerful nodes in CAN bus systems.The various operating modes along with the dedicated fail-safe features make the ATA650x SBC an excellent choice for all types of CAN 2.0 and CAN FD networks.Microchip's SBC is available in very small, space-saving packages with wettable flanks for automated optical inspection capability.Please see our functional safety feature page CAN/CAN FD

特性 Features

CAN FD TransceiverFully Compliant to ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5
Communication Speed up to 8 Mbps
Autonomous Bus Biasing According to ISO 11898‑2:2016
Very Low Sleep Current (typical 15 μA)
Differential Receiver with Wide Common-Mode Range
Functional Behavior Predictable Under All Supply Conditions
VIO Input Allows for Direct Interfacing with 1.8V and 5V Microcontrollers
Transceiver Disengages from the Bus when not powered
RXD Recessive Clamping Detection
Transmit Data (TXD) Dominant Time-Out Function
Receive Only Mode for Node Diagnostics and Fault Confinement
CANH/CANL Short Circuit and Overtemperature Protection
High Electrostatic Discharge (ESD) Handling Protection on the Bus Pins
Bus Pins Protected Against Transients in Automotive Environments
VCC Undervoltage Detection with Open Drain Reset Output
Undervoltage Detection on VIO Pin
INH Output to Control an External Load, e.g., Voltage Regulator
High-Voltage WAKE Input Pin
Remote Wake-Up through CAN Bus (Wake-Up Pattern (WUP) acc. to ISO 11898-2:2016)
Wake-Up Source Recognition
CAN FD Transceiver Fully Compliant to SAE J2962-2