AP1507集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

Description

The AP1507 is a monolithic IC designed for a step-down DC/DC converter and is capable of driving a 3A load without an external transistor. Due to reducing the number of external components, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes the feedback control have good line and load regulation without an external design. Regarding the protected function, the thermal shutdown is to prevent over temperature operating from damaging the device, and current limit is against over current operating of the output switch. If the current limit function occurred and VFB is down to 0.5V below, the switching frequency will be reduced. The AP1507 series operates at a switching frequency of 150KHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +4 tolerance on output voltage under specified input voltage and output load conditions, and +15 on the oscillator frequency. The output version included a fixed 3.3V, 5V, 12V, and an adjustable type. AP1507 is available in a 5-lead TO-252 lead-free or green package.

Features

• Output Voltage: 3.3V, 5V, 12V and Adjustable Output Version

• Adjustable Version Output Voltage Range, 1.23V to 18V +4

• 150KHz +15 Fixed Switching Frequency

• Voltage Mode Non-Synchronous PWM Control

• Thermal-Shutdown and Current-Limit Protection

• ON/OFF Shutdown Control Input

• Operating Voltage can be up to 22V

• Output Load Current: 3A

• Low Power Standby Mode

• Built-in Switching Transistor On Chip

• AP1507-XXD5L-XX

▪ Totally Lead-Free; RoHS Compliant (Notes 1 & 2)

• AP1507-XXD5-XX

▪ Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

▪ Halogen and Antimony Free. “Green” Device (Note 3)

Applications

• Simple High-Efficiency Step-Down Regulator

• On-Card Switching Regulators

• Positive to Negative Converter