300mA LDO Regulator with Over/Under Voltage Detection Function

文件：835.97 Kbytes 页数：16 Pages

AKM

旭化成微电子

1000mA LDO Regulator with Over/Under Voltage Detection Function

文件：788.07 Kbytes 页数：16 Pages

AKM

旭化成微电子

300mA LDO Regulator with Over/Under Voltage Detection Function

The AP1161 is an LDO regulator IC with On / Off control that can stably supply output current of 300mA. \nThe AP1161 has built-in voltage monitoring function of the regulator output, and it is possible to detect overvoltage and low voltage. With the voltage monitoring function self-diagnosis functio ·AP1161ABN300mA Output Current　Low-NoiseLDO Regulator with Self-diagnosis function：\n·Product Name ：AP1161ABN：\n·：\n·Output Noise：180nV/√Hz at 10kHz；\n·Maximum Output Current：300mA；\n·Self-diagnosis function：Over-Voltage Detection , Under-Voltage Detection；\n·Output Voltage and Accuracy：3.38V ± 65mV;

AKM

旭化成微电子

1000mA LDO Regulator with Over/Under Voltage Detection Function

The AP1163 is an LDO regulator IC with On / Off control that can stably supply output current of 1000mA. \nThe AP1163 has built-in voltage monitoring function of the regulator output, and it is possible to detect overvoltage and low voltage. With the voltage monitoring function self-diagnosis functi ·AP1163ABN1000mA Output Current　Low-NoiseLDO Regulator with Self-diagnosis function：\n·Product Name ：AP1163ABN：\n·：\n·Output Noise：180nV/√Hz at 10kHz；\n·Maximum Output Current：1000mA；\n·Self-diagnosis function：Over-Voltage Detection , Under-Voltage Detection；\n·Output Voltage and Accuracy：3.38V ± 65;

AKM

旭化成微电子

200uH, 20%, 31.23mOhm, 10.5Amp Max. DIP Toroidal Inductor

Sendust core is used to realize lower core loss. No thermal aging concerns. Low leakage magnetic flux.Elimination for impulse (EMI) noise.Ideally used as Power Factor Correction choke. Also can be used as boost inductor in power supplies. Ø50.0 × 50.0 x 23.5mm Max. Custom values are welcomed.Operati • Sendust core is used to realize lower core loss. • No thermal aging concerns. Low leakage magnetic flux.• Elimination for impulse (EMI) noise.• Ideally used as Power Factor Correction choke. • Also can be used as boost inductor in power supplies. • Ø50.0 × 50.0 x 23.5mm Max. Custom values are welc;

ITG