Analog Switch and Multiplexer Applications

High Current Switching Analog switches are sometimes required to conduct appreciable amounts of current, either continuous, or instantaneous - such as charging or discharging a capacitor. For best reliability, it is recommended that instantaneous current be limited to less than 80mA peak and that

文件：169.73 Kbytes 页数：3 Pages

INTERSIL

Analog Switch and Multiplexer Applications

Renesas

瑞萨

Receiving Mixer

Description The CXG1034TN is a receiving mixer MMIC. This IC is designed using the Sony’s GaAs J-FET process. Features • Low distortion Input IP3=+1.5 dBm (Typ.) • Low LO input power operation PLO=–15 dBm • RF, LO input matching circuit • Single 3 V power supply operation • 10-pin TSSOP pac

文件：89.4 Kbytes 页数：6 Pages

SONYSony Corporation

索尼

PATENTED GOLD METALIZED SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR

文件：31.51 Kbytes 页数：2 Pages

POLYFET

Linear Building Block . Single Operational Amplifiers in SOT Packages

General Description The TC1034/TC1035 are single CMOS operational amplifiers for low power applications. They have a typical operating supply current of 6µA, which is constant over the supply voltage range of 1.8V to 5.5V. The Op Amp has a rail-to-rail input and output which allows operation at

文件：479.57 Kbytes 页数：16 Pages

MICROCHIP

微芯科技