AMC0x11D-Q1 Automotive, Precision, 2V Input, Basic and Reinforced Isolated Amplifiers With Fixed-Gain Differential Output

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Linear input voltage range: –0.1V to 2V • High input impedance: 1GΩ (typical) • Supply voltage range: – High-side (VDD1): 3.0V to 5.5V – Low-side (VDD2): 3.0V to 5.5V • Fixed gain: 1V/

文件：1.32525 Mbytes 页数：30 Pages

TI

德州仪器

AMC0x11D-Q1 Automotive, Precision, 2V Input, Basic and Reinforced Isolated Amplifiers With Fixed-Gain Differential Output

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Linear input voltage range: –0.1V to 2V • High input impedance: 1GΩ (typical) • Supply voltage range: – High-side (VDD1): 3.0V to 5.5V – Low-side (VDD2): 3.0V to 5.5V • Fixed gain: 1V/

文件：1.33629 Mbytes 页数：31 Pages

TI

德州仪器

AMC0x11D Precision, 2V Input, Basic and Reinforced Isolated Amplifiers with Fixed-Gain and Differential Output

1 Features • Linear input voltage range: –0.1V to 2V • High input impedance: 1GΩ (typical) • Supply voltage range: – High-side (VDD1): 3.0V to 5.5V – Low-side (VDD2): 3.0V to 5.5V • Fixed gain: 1V/V • Differential output • Low DC errors: – Offset error: ±1mV (maximum) – Offset drift: ±10

文件：1.34941 Mbytes 页数：35 Pages

TI

德州仪器

AMC0x11D-Q1 Automotive, Precision, 2V Input, Basic and Reinforced Isolated Amplifiers With Fixed-Gain and Differential Output

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Linear input voltage range: –0.1V to 2V • High input impedance: 2.4GΩ (typical) • Supply voltage range: – High-side (VDD1): 3.0V to 5.5V – Low-side (VDD2): 3.0V to 5.5V • Fixed gain: 1

文件：1.01525 Mbytes 页数：28 Pages

TI

德州仪器

用于直流电压检测且具有差分输出的汽车级 2V 输入增强型隔离放大器

AMC0x11D-Q1 是一款精密的电隔离放大器，具有 2V 高阻抗输入和固定增益差分输出。高阻抗输入针对与高阻抗电阻分压器或具有高输出电阻的其他电压信号源的连接进行了优化。\n\n隔离栅将在不同共模电压电平下运行的系统器件隔开。该隔离栅抗电磁干扰性能极强。该隔离栅经过认证，可提供高达 5kVRMS 的增强型隔离（DWV 封装）和高达 3kVRMS 的基础型隔离（D 封装）(60s)。\n\nAMC0x11D-Q1 输出与输入电压成正比的差分信号。差分输出对接地漂移不敏感，这使得可以将输出信号进行远距离传输。\n\nAMC0x11D-Q1 器件采用 8 引脚、宽体和窄体 SOIC 封装，额定温 符合面向汽车应用的 AEC-Q100 标准： \n \n温度等级 1：–40°C 至 +125°C，TA\n \n\n \n线性输入电压范围：-0.1V 至 2V\n \n高输入阻抗：1GΩ（典型值）\n \n电源电压范围： \n \n高侧 (VDD1)：3.0V 至 5.5V\n \n低侧 (VDD2)：3.0V 至 5.5V\n \n\n \n固定增益：1V/V\n \n差分输出\n \n低直流误差： \n \n失调电压误差：±1.5mV（最大值）\n \n失调电压温漂：±10µV/°C（最大值）\n \n增益误差：±0.25%（最大值）\n \n增益漂移：±40ppm/°C（最大;

TI

德州仪器

AMC0x11D-Q1 Automotive, Precision, 2V Input, Basic and Reinforced Isolated Amplifiers With Fixed-Gain Differential Output

1 Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Linear input voltage range: –0.1V to 2V • High input impedance: 1GΩ (typical) • Supply voltage range: – High-side (VDD1): 3.0V to 5.5V – Low-side (VDD2): 3.0V to 5.5V • Fixed gain: 1V/

文件：1.33629 Mbytes 页数：31 Pages

TI

德州仪器