ADRF5144BCCZN中文资料亚德诺数据手册PDF规格书

GENERAL DESCRIPTION

The ADRF5144 is a reflective, single pole double-throw (SPDT)

switch manufactured in the silicon process.

The ADRF5144 operates from 1 GHz to 20 GHz with typical insertion

loss of 0.8 dB and typical isolation of 52 dB. The device has

a radio frequency (RF) input power handling capability of 40 dBm

average power and 44 dBm peak power for the insertion loss path.

The ADRF5144 draws a low current of 130 μA on the positive supply

of +3.3 V and 510 μA on negative supply of −3.3 V. The device

employs complementary metal-oxide semiconductor (CMOS)-/lowvoltage

transistor to transistor logic (LVTTL)-compatible controls.

The ADRF5144 requires no additional driver circuitry, which makes

it an ideal alternative to GaN and PIN diode-based switches.

The ADRF5144 can also operate with a single positive supply voltage

(VDD) applied while the negative supply voltage (VSS) is tied to

ground. In this operating condition, the small signal performance is

maintained while the switching characteristics, linearity, and power

handling performance are derated, see Table 2.

The ADRF5144 comes in a 20-lead, 3.0 mm × 3.0 mm, RoHS-compliant,

land grid array (LGA) package and can operate from −40°C to +85°C.

FEATURES

► Wideband frequency range: 1 GHz to 20 GHz

► Low insertion loss: 0.8 dB typical to 20 GHz

► High Isolation: 52 dB typical to 20 GHz

► High input linearity

► 0.1 dB power compression (P0.1dB): 44 dBm

► Third order intercept (IP3): >70 dBm

► Second order intercept (IP2): >120 dBm

► High power handling at TCASE = 85°C:

► Insertion loss path

► Average: 40 dBm

► Pulsed (>100 ns pulse width, 15 duty cycle): 43 dBm

► Peak (≤100 ns peak duration, 5 duty cycle): 44 dBm

► Hot-switching: 37 dBm

► 0.1 dB RF settling time with PIN ≤ 37 dBm: 750 ns

► No low frequency spurious

► Positive control interface: CMOS/LVTTL-compatible

► 20-lead, 3.0 mm × 3.0 mm LGA package

► Pin compatible with ADRF5141

APPLICATIONS

► Military radios, radars, and electronic counter measures

► Satcom

► Test and instrumentation

► GaN and PIN diode replacement