ADRF5030数据手册ADI中文资料规格书

描述 Description

The ADRF5030 is a non-reflective, single-pole double-throw(SPDT) switch manufactured using the silicon on insulator (SOI)process. The ADRF5030 operates from 100 MHz to 20 GHz withinsertion loss of lower than 1.2 dB and isolation of higher than45 dB. The device has an RF input power handling capability of33 dBm average/36 dBm peak for both RFC and RFx throughpaths, termination paths, and hot switching for both RFC andRFx ports. The ADRF5030 operates with dual-supply voltagesof ±3.3 V. The ADRF5030 employs complementary metal-oxidesemiconductor (CMOS) and low-voltage transistor to transistor logic(LVTTL)-compatible control.

The ADRF5030 can also operate with a single positive supply voltage(VDD) applied while the negative supply voltage (VSS) is tied toground. In this operating condition, the small signal performance ismaintained while the switching characteristics, linearity, and powerhandling performance are derated. See Table 2 for more details.

The ADRF5030 is pin compatible with the ADRF5022 andADRF5026, and also pin compatible with ADRF5031, a slow-switching,low cut-off version, which operates between 9 kHz to20 GHz.

The ADRF5030 is packaged in a 20-terminal, 3 mm × 3 mm,RoHS-compliant, land grid array (LGA). The ADRF5030 operatesfrom −40°C to +105°C.

特性 Features

Wideband frequency range, 100 MHz to 20 GHz
Non-reflective design
Low insertion loss
0.7 dB typical between 0.1 GHz to 6 GHz
0.9 dB typical between 6 GHz to 12 GHz
1.2 dB typical up to 20 GHz
High isolation
55 dB typical between 100 MHz to 6 GHz
50 dB typical between 6 GHz to 12 GHz
45 dB typical up to 20 GHz/li>
High input linearity
P0.1dB: >36 dBm typical
IP3: 60 dBm typical
High RF power handling
Through path: 36 dBm peak / 33 dBm avg
Terminated Path: 36 dBm peak / 33 dBm avg
Hot switching path: 36 dBm peak /33 dBm avg

CMOS/LVTTL compatible
No low-frequency spur; No negative voltage generator
Fast RF switching time: 70 ns
RF settling time (0.1 dB): 95 ns
Single-supply operation capability (VDD = 3.3 V, VSS = 0 V)
20-terminal, 3 mm x 3 mm LGA package
Pin Compatible with ADRF5022 & ADRF5026

应用 Application

Test instrumentation
Military radios, radars, electronic counter measures (ECMs)
Microwave radios and very small aperture terminals (VSATs)