ADP5063CP-EVALZ开发板套件编程器的评估演示板及套件规格书PDF中文资料

ADP5063CP-EVALZ属于开发板套件编程器的评估演示板及套件。由亚德诺半导体技术有限公司制造生产的ADP5063CP-EVALZ评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。

GENERAL DESCRIPTION

The ADP5063 charger is fully compliant with USB 3.0 and the USB Battery Charging 1.2 Compliance Plan Specification, and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5063 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V, thereby alleviating concerns about USB bus spikes during disconnection or connection scenarios.

FEATURES

Default charging termination voltage at 3.6 V

Fully compatible with USB 3.0 and USB Battery Charging 1.2

Compliance Plan Specification

Operating input voltage from 4 V to 6.7 V

Tolerant input voltage from −0.5 V to +20 V (USB VBUS)

Fully programmable via I2C

Flexible digital control inputs

Up to 2.1 A current from an ac charger in LDO mode

Built-in current sensing and limiting

As low as 55 mΩ battery isolation FET between battery and

charger output

Thermal regulation prevents overheating

Compliant with JEITA1 and JEITA2 Li-Ion battery charging

temperature specifications

SYS_EN flag permits the system to be disabled until battery is at

the minimum required level for guaranteed system start-up

4 mm × 4 mm LFCSP package

APPLICATIONS

Single cell lithium iron phosphate (LiFePO4) portable

equipment

Portable medical devices

Portable instrumentation devices

Portable consumer devices