ADP5063ACPZ-1-R7集成电路（IC）的电池充电器规格书PDF中文资料

ADP5063ACPZ-1-R7属于集成电路（IC）的电池充电器。由亚德诺半导体技术有限公司制造生产的ADP5063ACPZ-1-R7电池充电器电池充电器 PMIC（电源管理集成电路）是元器件级产品系列，用于在电子设备中实现电池充电控制和充电管理功能。这些器件主要根据电池化学及其设计用于的电池数量来分类，可提供电化学电池和超级电容器安全充电所必需的电流或电压调节和监视功能。

GENERAL DESCRIPTION

The ADP5063 charger is fully compliant with USB 3.0 and the USB Battery Charging 1.2 Compliance Plan Specification, and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5063 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V, thereby alleviating concerns about USB bus spikes during disconnection or connection scenarios.

FEATURES

Default charging termination voltage at 3.6 V

Fully compatible with USB 3.0 and USB Battery Charging 1.2

Compliance Plan Specification

Operating input voltage from 4 V to 6.7 V

Tolerant input voltage from −0.5 V to +20 V (USB VBUS)

Fully programmable via I2C

Flexible digital control inputs

Up to 2.1 A current from an ac charger in LDO mode

Built-in current sensing and limiting

As low as 55 mΩ battery isolation FET between battery and

charger output

Thermal regulation prevents overheating

Compliant with JEITA1 and JEITA2 Li-Ion battery charging

temperature specifications

SYS_EN flag permits the system to be disabled until battery is at

the minimum required level for guaranteed system start-up

4 mm × 4 mm LFCSP package

APPLICATIONS

Single cell lithium iron phosphate (LiFePO4) portable

equipment

Portable medical devices

Portable instrumentation devices

Portable consumer devices