ADP1754集成电路（IC）的稳压器-线性规格书PDF中文资料

ADP1754属于集成电路（IC）的稳压器-线性。由亚德诺半导体技术有限公司制造生产的ADP1754稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。

GENERAL DESCRIPTION

The ADP1754/ADP1755 are low dropout (LDO) CMOS linear regulators that operate from 1.6 V to 3.6 V and provide up to 1.2 A of output current. These low VIN/VOUT LDOs are ideal for regulation of nanometer FPGA geometries operating from 2.5 V down to 1.8 V I/O rails, and for powering core voltages down to 0.75 V. Using an advanced proprietary architecture, the ADP1754/

ADP1755 provide high power supply rejection ratio (PSRR) and low noise, and achieve excellent line and load transient response with only a small 4.7 µF ceramic output capacitor.

FEATURES

Maximum output current: 1.2 A

Input voltage range: 1.6 V to 3.6 V

Low shutdown current: <2 µA

Very low dropout voltage: 105 mV @ 1.2 A load

Initial accuracy: ±1

Accuracy over line, load, and temperature: ±2

7 fixed output voltage options with soft start 0.75 V to 2.5 V (ADP1754)

Adjustable output voltage option with soft start 0.75 V to 3.3 V (ADP1755)

High PSRR

65 dB @ 1 kHz

65 dB @ 10 kHz

54 dB @ 100 kHz

23 μV rms at 0.75 V output

Stable with small 4.7 µF ceramic output capacitor

Excellent load and line transient response

Current-limit and thermal overload protection

Power-good indicator

Logic-controlled enable

Reverse current protection