622 Mbps Clock and Data Recovery IC

GENERAL DESCRIPTION The ADN2806 provides the receiver functions for clock and data recovery, and data retiming for 622 Mbps NRZ data. The ADN2806 automatically locks to 622 Mbps data without the need for an external reference clock or programming. All SONET jitter requirements are met, including

文件：408.06 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

FEATURES Exceeds SONET requirements for jitter transfer/ generation/tolerance Patented clock recovery architecture No reference clock required Loss-of-lock indicator I2C® interface to access optional features Single-supply operation: 3.3 V Low power: 359 mW typical 5 mm × 5 mm, 32-lead LFC

文件：319.52 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps时钟和数据恢复IC

ADN2806可提供下列接收器功能：时钟和数据恢复以及数据重定时，适用于622 Mbps NRZ数据。它可自动锁定至622 Mbps数据速率，而无需外部参考时钟或编程。无输入数据时，输出时钟漂移不大于±5%。该器件满足所有的SONET抖动要求，包括抖动传递、抖动产生和抖动容差。所有规格均相对于−40°C至+85°C环境温度而言，除非另有说明。                                                          \n\n 该器件配合PIN二极管、TIA前置放大器和限幅放大器，可以实现高度集成的低成本、低功耗光纤接收器。\n\n • 超过SONET抖动传递/产生/容差要求\n\n• 取得专利的时钟恢复架构\n\n• 无需参考时钟\n\n• 失锁指示器\n\n• 通过I2C® 接口访问可选特性\n\n• 单电源供电：3.3 V\n\n• 低功耗：359 mW（典型值）\n\n• 5 mm × 5 mm、32引脚LFCSP无铅封装;

ADI

亚德诺

622 Mbps Clock and Data Recovery IC

FEATURES Exceeds SONET requirements for jitter transfer/ generation/tolerance Patented clock recovery architecture No reference clock required Loss-of-lock indicator I2C® interface to access optional features Single-supply operation: 3.3 V Low power: 359 mW typical 5 mm × 5 mm, 32-lead LFC

文件：319.52 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

FEATURES Exceeds SONET requirements for jitter transfer/ generation/tolerance Patented clock recovery architecture No reference clock required Loss-of-lock indicator I2C® interface to access optional features Single-supply operation: 3.3 V Low power: 359 mW typical 5 mm × 5 mm, 32-lead LFC

文件：319.52 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

GENERAL DESCRIPTION The ADN2806 provides the receiver functions for clock and data recovery, and data retiming for 622 Mbps NRZ data. The ADN2806 automatically locks to 622 Mbps data without the need for an external reference clock or programming. All SONET jitter requirements are met, including

文件：408.06 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

GENERAL DESCRIPTION The ADN2806 provides the receiver functions for clock and data recovery, and data retiming for 622 Mbps NRZ data. The ADN2806 automatically locks to 622 Mbps data without the need for an external reference clock or programming. All SONET jitter requirements are met, including

文件：408.06 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

FEATURES Exceeds SONET requirements for jitter transfer/ generation/tolerance Patented clock recovery architecture No reference clock required Loss-of-lock indicator I2C® interface to access optional features Single-supply operation: 3.3 V Low power: 359 mW typical 5 mm × 5 mm, 32-lead LFC

文件：319.52 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

FEATURES Exceeds SONET requirements for jitter transfer/ generation/tolerance Patented clock recovery architecture No reference clock required Loss-of-lock indicator I2C® interface to access optional features Single-supply operation: 3.3 V Low power: 359 mW typical 5 mm × 5 mm, 32-lead LFC

文件：319.52 Kbytes 页数：20 Pages

AD

亚德诺

622 Mbps Clock and Data Recovery IC

GENERAL DESCRIPTION The ADN2806 provides the receiver functions for clock and data recovery, and data retiming for 622 Mbps NRZ data. The ADN2806 automatically locks to 622 Mbps data without the need for an external reference clock or programming. All SONET jitter requirements are met, including

文件：408.06 Kbytes 页数：20 Pages

AD

亚德诺