ADC08B200中文资料缓冲区容量为 1K 的 8 位、200MSPS 模数转换器 (ADC)数据手册TI规格书

描述 Description

The ADC08B200 is a high speed analog-to-digital converter (ADC) with an integrated capture buffer. The 8-bit, 200 MSPS A/D core is based upon the proven ADC08200 with integrated track-and-hold and is optimized for low power consumption. This device contains a selectable size capture buffer of up to 1,024 bytes that allows fast capture of an input signal with a slower readout rate. An on-chip clock PLL circuit provides the option of on-chip clock rate multiplication to provide the high speed sampling clock.The ADC08B200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08B200's reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 2.7V to 3.3V logic. The digital inputs and outputs are low voltage TTL/CMOS compatible and the output data format is straight binary.The ADC08B200Q runs on an Automotive Grade Flow and is AEC-Q100 Grade 2 Qualified. The ADC08B200 is offered in a 48-pin plastic package (TQFP) and is specified over the extended industrial temperature range of −40°C to +105°C. An evaluation board is available to assist in the easy evaluation of the ADC08B200.

特性 Features

• Single-Ended Input
• PLL for Clock Multiplication
• Linear Power Scaling with Sample Rate
• AEC-Q100 Grade 2 Qualified
• Resolution 8 Bits
• DNL ±0.4 LSB (typ)
• THD (fIN= 49 MHz) −53 dBc (typ)
• Operating (50 MHz) Input 2 mW / Msps (typ)
• Power Down 2.15 mW (typ)

简介

ADC08B200属于集成电路（IC）的模数转换器（ADC）。由TI制造生产的ADC08B200模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。