ADC08100集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

ADC08100属于集成电路（IC）的模数转换器（ADC）。由德州仪器制造生产的ADC08100模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

1FEATURES

2• Single-ended Input

• Internal Sample-and-hold Function

• Low Voltage (Single +3V) Operation

• Small Package

• Power-down Feature

APPLICATIONS

• Flat Panel Displays

• Projection Systems

• Set-top Boxes

• Battery-powered Instruments

• Communications

• Medical Scan Converters

• X-ray Imaging

• High Speed Viterbi Decoders

• Astronomy

KEY SPECIFICATIONS

• Resolution 8 bits

• Maximum Sampling Frequency 100 Msps (Min)

• DNL 0.4 LSB (Typ)

• ENOB 7.4 Bits (Typ) at fIN = 41 MHz

• THD –60 dB (Typ)

• Power Consumption

– Operating 1.3 mW/Msps (Typ)

– Power Down: 1 mW (Typ)

DESCRIPTION

The ADC08100 is a low-power, 8-bit, monolithic

analog-to-digital converter with an on-chip track-and-

hold circuit. Optimized for low cost, low power, small

size and ease of use, this product operates at

conversion rates of 20 Msps to 100 Msps with

outstanding dynamic performance over its full operating range while consuming just 1.3 mW per

MHz of clock frequency. That's just 130 mW of power

at 100 Msps. Raising the PD pin puts the ADC08100

into a Power Down mode where it consumes just 1

mW.

The unique architecture achieves 7.4 Effective Bits

with 41 MHz input frequency. The excellent DC and AC characteristics of this device, together with its low

power consumption and single +3V supply operation,

make it ideally suited for many imaging and

communications applications, including use in

portable equipment. Furthermore, the ADC08100 is

resistant to latch-up and the outputs are short-circuit

proof. The top and bottom of the ADC08100's

reference ladder are available for connections,

enabling a wide range of input possibilities. The

digital outputs are TTL/CMOS compatible with a

separate output power supply pin to support

interfacing with 3V or 2.5V logic. The digital inputs

(CLK and PD) are TTL/CMOS compatible. The output

format is straight binary

The ADC08100 is offered in a 24-lead plastic

package (TSSOP) and is specified over the industrial

temperature range of −40°C to +85°C.