ADC08100

8 位 100MSPS 1.3mW/MSPS 模数转换器 (ADC); • Single-ended Input\n• Internal Sample-and-hold Function\n• Low Voltage (Single +3V) Operation\n• Small Package\n• Power-down Feature\n Key Specifications \n• Resolution 8 bits\n• Maximum Sampling Frequency 100 Msps (Min)\n• DNL 0.4 LSB (Typ)\n• ENOB 7.4 Bits (Typ) at fIN = 41 MHz\n• THD –60 dB (Typ)\n• Power Consumption \n• Operating 1.3 mW/Msps (Typ)\n• Power Down: 1 mW (Typ);

The ADC08100 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 20 Msps to 100 Msps with outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That's just 130 mW of power at 100 Msps. Raising the PD pin puts the ADC08100 into a Power Down mode where it consumes just 1 mW. The unique architecture achieves 7.4 Effective Bits with 41 MHz input frequency. The excellent DC and AC characteristics of this device, together with its low power consumption and single +3V supply operation, make it ideally suited for many imaging and communications applications, including use in portable equipment. Furthermore, the ADC08100 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08100's reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output format is straight binary The ADC08100 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40°C to +85°C.

ADC08100

8-Bit, 20 MSPS to 100 MSPS, 1.3 mW/MSPS A/D Converter

ADC08100

8-Bit, 20 Msps to 100 Msps, 1.3 mW/Msps A/D Converter

ADC08100

ADC08100 8-Bit, 20 Msps to 100 Msps, 1.3 mW/Msps A/D Converter

ADC081000

高性能、低功耗 8 位、1 GSPS模数转换器; • Internal Sample-and-Hold\n• Single +1.9V ±0.1V Operation\n• Adjustable Output Levels\n• Ensured No Missing Codes\n• Low Power Standby Mode;

The ADC081000 is a low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 1.6 GSPS. Consuming a typical 1.4 Watts at 1 GSPS from a single 1.9 Volt supply, this device is ensured to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 500 MHz input signal and a 1 GHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS digital outputs are compliant with IEEE 1596.3-1996, with the exception of a reduced common mode voltage of 0.8V. The converter has a 1:2 demultiplexer that feeds two LVDS buses, reducing the output data rate on each bus to half the sampling rate. The data on these buses are interleaved in time to provide a 500 MHz output rate per bus and a combined output rate of 1 GSPS. The converter typically consumes less than 10 mW in the Power Down Mode and is available in a 128-lead HLQFP and operates over the industrial (–40°C ≤ TA ≤ +85°C) temperature range.

ADC08100_08

8-Bit, 20 Msps to 100 Msps, 1.3 mW/Msps A/D Converter

ADC08100_14

ADC08100 8-Bit, 20 Msps to 100 Msps, 1.3 mW/Msps A/D Converter

ADC081000

High Performance, Low Power 8-Bit, 1 GSPS A/D Converter

ADC081000

High Performance, Low Power 8-Bit, 1 GSPS A/D Converter

ADC081000

High Performance, Low Power 8-Bit, 1 GSPS A/D Converter