AD7785BRUZ-REEL集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD7785BRUZ-REEL属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD7785BRUZ-REEL模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD7785 is a low power, low noise, complete analog front end for high precision measurement applications. The AD7785 contains a low noise 20-bit ∑-Δ ADC with three differential analog inputs. The on-chip, low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC. With a gain setting of 64, the rms noise is 40 nV when the update rate equals 4.17 Hz.

FEATURES

Up to 20 bits effective resolution

RMS noise

40 nV @ 4.17 Hz

85 nV @ 16.7 Hz

Current: 400 μA typical

Power-down: 1 μA maximum

Low noise programmable gain instrumentation amp

Band gap reference with 4 ppm/°C drift typical

Update rate: 4.17 Hz to 470 Hz

3 differential inputs

Internal clock oscillator

Simultaneous 50 Hz/60 Hz rejection

Programmable current sources

On-chip bias voltage generator

Burnout currents

Power supply: 2.7 V to 5.25 V

–40°C to +105°C temperature range

Independent interface power supply

16-lead TSSOP package

Interface

3-wire serial

SPI®, QSPI™, MICROWIRE™, and DSP compatible

Schmitt trigger on SCLK

APPLICATIONS

Thermocouple measurements

RTD measurements

Thermistor measurements

Gas analysis