AD7783集成电路（IC）的模数转换器（ADC）规格书PDF中文资料

AD7783属于集成电路（IC）的模数转换器（ADC）。由亚德诺半导体技术有限公司制造生产的AD7783模数转换器（ADC）模数转换器（ADC、A/D 或 A 转 D）对模拟信号进行采样，例如由麦克风采集的声音或传感器的输出，然后将其转换为数字信号。一般来说，数字输出是二进制补码二进制数，与输入成比例。输入类型可能是差分、伪差分或单端输入。模数转换器可按照位数、采样率、输入数、接口、转换器数和架构（例如自适应增量、双斜率、折叠、流水线、SAR、三角积分、两步式）进行选择。

GENERAL DESCRIPTION

The AD7783 is a complete analog front end for low frequency measurement applications. The 24-bit sigma-delta ADC contains one fully differential input channel that can be configured with a gain of 1 or 16 allowing full-scale input signal ranges of ±2.56 V or ±160 mV from a +2.5 V differential reference input. It also contains two 200 mA integrated current sources.

FEATURES

Single-Channel, 24-Bit
Σ-Δ ADC

Pin Configurable (No Programmable Registers)

ISOURCE Select™ Pin Programmable Input Ranges (±2.56 V or ±160 mV)

Fixed 19.79 Hz Update Rate

Simultaneous 50 Hz and 60 Hz Rejection

24-Bit No Missing Codes

18.5-Bit p-p Resolution (±2.56 V Range)

16.5-Bit p-p Resolution (±160 mV Range)

INTERFACE

Master or Slave Mode of Operation

Slave Mode 3-Wire Serial SPI®, QSPI™, MICROWIRE™, and DSP-Compatible Schmitt Trigger on SCLK

POWER

Specified for Single 3 V and 5 V Operation

Normal: 1.3 mA @ 3 V

Power-Down: 9 μA

ON-CHIP FUNCTIONS

Rail-to-Rail Input Buffer and PGA

APPLICATIONS

Sensor Measurement

Industrial Process Control

Temperature Measurement

Pressure Measurement

Weigh Scales

Portable Instrumentation