2.7 V to 5.5 V, 140 muA, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD53101 is a single, 10-bit, buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply, consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing. The AD5310 utilizes a versatile 3-wire serial interface that operat

文件：578.42 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V to 5.5 V, 140 muA, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD53101 is a single, 10-bit, buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply, consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing. The AD5310 utilizes a versatile 3-wire serial interface that operat

文件：578.42 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V to 5.5 V, 140 muA, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD53101 is a single, 10-bit, buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply, consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing. The AD5310 utilizes a versatile 3-wire serial interface that operat

文件：578.42 Kbytes 页数：16 Pages

AD

亚德诺

2.7 V to 5.5 V, 140 A, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

文件：578.42 Kbytes 页数：16 Pages

AD

亚德诺

10位nanoDAC、SPI接口以及2 ppm/°C 片内基准电压源

AD5310R / AD5311R属于nanoDAC™系列，分别是低功耗、单通道、10 位缓冲电压输出DAC。该器件内置一个2.5 V、2 ppm/°C内部基准电压源。输出范围可以通过编程设置为0 V至VREF或0 V 至 2 ×VREF。采用2.7 V至5.5 V单电源供电，通过设计保证单调性。采用10引脚MSOP封装。\n\n AD5310R / AD5311R还内置一个上电复位电路，确保DAC输出上电至零电平并保持该电平，直到执行一次有效的写操作为止。此外器件具有掉电特性，在掉电模式下，器件在5 V时的功耗降至2 μA。\n\n AD5310R / AD5311R采用 • 高相对精度(INL)：±0.5 LSB（最大值）\n\n• 低漂移2.5 V基准电压源：2 ppm/°C（典型值）\n\n• 可选输出范围：2.5 V或5 V\n\n• 总不可调整误差(TUE)：0.06% FSR（最大值）\n失调误差：±1.5 mV（最大值）\n增益误差：±0.05 % FSR（最大值）;

ADI

亚德诺

包装：散装 描述：IC ASIC SBGA

AD

亚德诺

包装：散装 描述：IC ASIC SBGA

AD

亚德诺

Package：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）；包装：管件 类别：集成电路（IC） 数模转换器（DAC） 描述：IC DAC 10BIT V-OUT 8MSOP

AD

亚德诺