2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

文件：359.53 Kbytes 页数：20 Pages

AD

亚德诺

2.7 V to 5.5 V, 140 uA, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD53101 is a single, 10-bit, buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply, consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing. The AD5310 utilizes a versatile 3-wire serial interface that operat

文件：164.05 Kbytes 页数：12 Pages

AD

亚德诺

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

文件：274.89 Kbytes 页数：20 Pages

AD

亚德诺

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

文件：324.46 Kbytes 页数：20 Pages

AD

亚德诺

2.5 V to 5.5 V, 500 關A, Quad Voltage Output 8-/10-/12-Bit DACs in 10-Lead Packages

GENERAL DESCRIPTION The AD5304/AD5314/AD53241 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achie

文件：357.74 Kbytes 页数：24 Pages

AD

亚德诺

2.7 V to 5.5 V, 140 muA, Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23

GENERAL DESCRIPTION The AD53101 is a single, 10-bit, buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply, consuming 115 µA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing. The AD5310 utilizes a versatile 3-wire serial interface that operat

文件：578.42 Kbytes 页数：16 Pages

AD

亚德诺

2.5 V to 5.5 V, 500 uA, 2-Wire Interface Quad Voltage Output, 8-/10-/12-Bit DACs

文件：427.29 Kbytes 页数：20 Pages

AD

亚德诺

2.5 V to 5.5 V, 500 關A, 2-Wire Interface Interface

文件：565.67 Kbytes 页数：24 Pages

AD

亚德诺

2.5 V to 5.5 V, Parallel Interface Octal Voltage Output 8-/10-/12-Bit DACs

文件：476.13 Kbytes 页数：24 Pages

AD

亚德诺

2.7 V至5.5 V、140 µA、轨到轨电压输出10位DAC，采用SOT-23封装

AD53101是一款单通道、10位缓冲电压输出DAC，采用2.7 V至5.5 V单电源供电，3 V时功耗为115 µA。它内置片内精密输出放大器，能够实现轨到轨输出摆幅。AD5310采用多功能三线式串行接口，能够以最高30 MHz的时钟速率工作，并与标准SPI™、QSPI™、MICROWIRE®、DSP接口标准兼容。\n\n 这款器件的基准电压从电源输入获得，因此它具有最宽的动态输出范围。上述器件内置一个上电复位电路，确保DAC输出上电至0 V并保持该电平，直到对该器件执行一次有效的写操作为止。此外还具有省电特性，在省电模式下，器件在5 V时的功耗降至200 nA，并提供软件可选输出 • 单通道10位DAC \n\n• 6引脚SOT-23和8引脚μSOIC封装 \n\n• 微功耗：140 µA (5 V)\n\n• 关断模式的功耗：200 nA (5 V)，50 nA (3 V) \n\n• 2.7 V至5.5 V电源供电\n\n• 通过设计保证单调性\n\n• 基准电压从电源获得;

ADI

亚德诺