2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8

Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 2.5 A Maximum Peak O

文件：781.02 Kbytes 页数：19 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8

文件：1.94491 Mbytes 页数：24 Pages

BOARDCOM

博通

2.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 2.5 A Maximum Peak O

文件：707.21 Kbytes 页数：19 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 2.5 A Maximum Peak O

文件：707.21 Kbytes 页数：19 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 2.5 A Maximum Peak O

文件：707.21 Kbytes 页数：19 Pages

AVAGO

安华高

2.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The ACPL-H342/ACPL-K342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. Features • 2.5 A Maximum Peak O

文件：707.21 Kbytes 页数：19 Pages

AVAGO

安华高

扩展型 SO8 封装的带有有源米勒箝位的 2.5 Amp 输出电流 IGBT 门极驱动器光电耦合器、轨至轨输出电压和 UVLO

ACPL-K342/ACPL-H342 包含一个 AlGaAs LED，它与一个功率输出级集成电路进行了光电耦合。此光电耦合器可完美适用于电机控制变频器应用中使用的驱动功率 IGBT 和 MOSFET。\n\n输出级的高工作电压范围提供了门控设备所需的驱动电压。 此光电耦合器提供的电压和高峰值输出电流使它非常适于额定值达 1200V/150A 的直接驱动 IGBT。\n\n对于额定值更高的 IGBT，可以通过在 ACPL-H342/ACPL-K342 输出端搭建分列的放大电路来实现。 ACPL-H342 和 ACPL-K342 在 IEC/ EN/DIN EN 60747-5-5 的最高绝缘电 ·2.5A 最大峰值输出电流\n·2.0A 最小峰值输出电流\n·内置有源米勒箝位\n·轨至轨输出电压\n·缩短传播延迟来最小化死区时间\n·tPHL PLH 来提供“反跨”传导\n·LED 输入阀值电流磁滞\n·ICC = 2.5 mA 的最大供电电流能够实现自举电源\n·带滞后欠压锁定 (UVLO) 保护\n·VCM = 1500V时\n最低 25kV/μs 共模抑制 (CMR) 能力\n·宽工作电压范围：15V 到 30V\n·工业温度范围：-40°C 至 105°C\n·安全规范认证：·UL 认可 1 分钟 3750/5000 VRMS。\n·CSA\n·IEC/EN/DIN EN 6;

Broadcom

博通