Automotive Wide Operating Temperature 1MBd Digital Optocoupler in a 5-Pin Surface Mount Plastic Package

Description The ACPL-M43T is a single channel, high temperature, high CMR, high speed digital optocoupler in a five lead miniature footprint specifically used in the automotive applications. The SO-5 JEDEC registered (MO-155) package outline does not require “through

文件：301.54 Kbytes 页数：9 Pages

AVAGO

安华高

Wide Operating Temperature Automotive Digital Optocoupler

Description The ACPL-M43T is a single channel, high temperature, high CMR, high speed digital optocoupler in a five lead miniature footprint specifically used in the automotive applications. The SO-5 JEDEC registered (MO-155) package outline does not require “through

文件：136.85 Kbytes 页数：9 Pages

AVAGO

安华高

Wide Operating Temperature Automotive Digital Optocoupler

Description The ACPL-M43T is a single channel, high temperature, high CMR, high speed digital optocoupler in a five lead miniature footprint specifically used in the automotive applications. The SO-5 JEDEC registered (MO-155) package outline does not require “through

文件：136.85 Kbytes 页数：9 Pages

AVAGO

安华高

Wide Operating Temperature Automotive Digital Optocoupler

Description The ACPL-M43T is a single channel, high temperature, high CMR, high speed digital optocoupler in a five lead miniature footprint specifically used in the automotive applications. The SO-5 JEDEC registered (MO-155) package outline does not require “through

文件：136.85 Kbytes 页数：9 Pages

AVAGO

安华高

Wide Operating Temperature Automotive Digital Optocoupler

Description The ACPL-M43T is a single channel, high temperature, high CMR, high speed digital optocoupler in a five lead miniature footprint specifically used in the automotive applications. The SO-5 JEDEC registered (MO-155) package outline does not require “through

文件：136.85 Kbytes 页数：9 Pages

AVAGO

安华高

汽车用 1MBd 晶体管输出光电耦合器

ACPL-M43T 为采用 SO-5 封装的单通道高温、高 CMR、高速数字汽车用光电耦合器。采用的 SO-5 封装方式不需在印刷电路板上使用贯孔，封装占用面积只有标准 DIP 封装的 1/4，引脚安排兼容标准表面贴装程序。ACPL-M43T 具备符合汽车应用环境的强化功能，这款光电耦合器使用新 AlGaAsP LED 取得更高的 LED 可靠度和更长的工作寿命，输出驱动电流更低。这款数字汽车用光电耦合器在发光二极管和集成芯片检测器间使用绝缘层提供输入和输出间的电气绝缘。光二极管偏置和输出晶体管集电极的独立连接可以通过降低基极到集电极间的电容将速度提升到传统光晶体管耦合器的百倍以上。在整个工作 ·适合汽车应用高温和高可靠度 IPM 驱动器\n·VCM = 1,500V 时 30kV/μs 高共模抑制 (CMR) 能力\n·紧凑自动可插入 SO-5 封装\n·-40°C 到 125°C 宽温工作范围\n·1MBd 高速\n·10mA LED 驱动电流\n·500ns 低传播延迟\n·全球安全规范认证：\n- UL1577、4000Vrms/1min\n- CSA\n·符合 AEC-Q100 测试指南要求;

Broadcom

博通