丝印：AC05；Package：WQFN；CDx4AC05 Hex Inverters With Open-Drain Outputs

1 Features • AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage • Speed of bipolar F, AS, and S, with significantly reduced power consumption • Fanout to 15 F devices • SCR-latchup-resistant CMOS process and circuit design • Exceeds 2kV ES

文件：2.07085 Mbytes 页数：31 Pages

TI

德州仪器

丝印：AC05；Package：TSSOP；CDx4AC05 Hex Inverters With Open-Drain Outputs

1 Features • AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage • Speed of bipolar F, AS, and S, with significantly reduced power consumption • Fanout to 15 F devices • SCR-latchup-resistant CMOS process and circuit design • Exceeds 2kV ES

文件：2.07085 Mbytes 页数：31 Pages

TI

德州仪器

丝印：AC05M；Package：SOIC；CDx4AC05 Hex Inverters With Open-Drain Outputs

1 Features • AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage • Speed of bipolar F, AS, and S, with significantly reduced power consumption • Fanout to 15 F devices • SCR-latchup-resistant CMOS process and circuit design • Exceeds 2kV ES

文件：2.07085 Mbytes 页数：31 Pages

TI

德州仪器

丝印：AC05M；Package：SOIC；CDx4AC05 Hex Inverters With Open-Drain Outputs

1 Features • AC types feature 1.5V to 5.5V operation and balanced noise immunity at 30% of the supply voltage • Speed of bipolar F, AS, and S, with significantly reduced power consumption • Fanout to 15 F devices • SCR-latchup-resistant CMOS process and circuit design • Exceeds 2kV ES

文件：2.07085 Mbytes 页数：31 Pages

TI

德州仪器

丝印：AC05Q；Package：TSSOP；SN74AC05-Q1 Automotive Hex Inverters with Open-Drain Outputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.55716 Mbytes 页数：29 Pages

TI

德州仪器

丝印：AC05Q；Package：WQFN；SN74AC05-Q1 Automotive Hex Inverters with Open-Drain Outputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.55716 Mbytes 页数：29 Pages

TI

德州仪器

Cemented wirewound resistors

DESCRIPTION The resistor element is a resistive wire which is wound in a single layer on a ceramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the leads are connected to the caps by welding. Tinned copper-clad iron leads with poor heat conductivi

文件：398.91 Kbytes 页数：24 Pages

PHI

飞利浦

Cemented wirewound resitors

DESCRIPTION The resistor element is a resistive wire which is wound in a single layer on a ceramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the leads are connected to the caps by welding. Tinned copper-clad iron leads with poor heat conductivi

文件：398.91 Kbytes 页数：24 Pages

ETC1List of Unclassifed Manufacturers

etc未分类制造商未分类制造商

Cemented Wirewound Resistors

FEATURES • All welded construction • Ceramic core • Non-flammable cement coating • Tinned copper-clad iron leads (for axial parts) • High power dissipation in small volume • Ideal for pulse application • Material categorization: For definitions of compliance please see www.vishay.com/doc?9

文件：151.94 Kbytes 页数：9 Pages

VishayVishay Siliconix

威世科技威世科技半导体

Cemented wirewound resistors

FEATURES · High power dissipation in small volume · High pulse load handling capabilities. DESCRIPTION The resistor element is a resistive wire which is wound in a single layer on a ceramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the lea

文件：118.64 Kbytes 页数：22 Pages

YAGEO

国巨