Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IM12-DI03-1S-2T-S/24VDC isolating switching amplifier. The device can be installed in zone 2. The device can be switched between 1-channel operation with signal doubling or 1-channel operation with alarm

文件：218.58 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 2-channel

The isolating transducers IM12-AI01-2I-2IUHPR/24VDC transmit analog measured signals galvanically isolated. The devices are suitable for operation in zone 2. The 2-channel device has two inputs for the operation of HART® 2-wire transducers as well as active and passive HART® 2-wire transmitte

文件：313.68 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Solenoid Driver 1-channel

The 1-channel IMX12-DO01-1U-1UPR/24VDC/CC solenoid driver provides an intrinsically safe output signal limited in current and voltage. Loads in the Ex area can thus be supplied directly. Typical applications are the control of Ex i pilot valves and the powering of displays and transmitters. Th

文件：347.54 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Temperature measuring amplifier 2-channel

The 2-channel temperature measuring amplifier IMX12-TI02-2TCURTDR-2I-C0/24VDC has inputs for: Thermocouples acc. to IEC 60584, DIN 43710, GOST R 8.585-2001, low voltages (-150 … +150 mV), RTDs acc. to IEC 60751, DIN 43760, GOST 6651-94 (2, 3-wire) and resistors 0…5 kò (2, 3-wire). The cold ju

文件：294.39 Kbytes 页数：5 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Frequency Transducer/Pulse Counter 1-channel

The frequency transducer/pulse counter IMX12-FI01-1SF-1I1R-CPR/24VDC/CC is equipped with intrinsically safe input circuits and transmits frequency signals up to 20,000 Hz from the Ex area to the non-Ex area such that the signals are galvanically isolated. In addition, limits, slip or clockwise

文件：421.41 Kbytes 页数：6 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Analog Signal Isolator 1-channel

The 1-channel IMXK12-AO01-1I-1I-H0/24VDC signal isolator is designed to transmit the normalized current signal galvanically isolated 1:1 from the non-Ex area to the Ex-area. In addition to the analog signal, digital HART® communication signals can also be transmitted bidirectionally. Typical a

文件：172.62 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 2-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IMX12-DI01-2S-2T-/24VDC isolating switching amplifier. The device is equipped with intrinsically safe input circuits and can be installed in zone 2. A DIP switch on the device allows to toggle betwee

文件：229.88 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating switching amplifier 1-channel

Sensors according to EN 60947-5-6 (NAMUR) or potential-free contacts can be connected to the IMX12-DI03-1S-2R-S/24VDC/CC isolating switching amplifier. The device can be installed in zone 2. The device can be switched between 1-channel operation with signal doubling or 1-channel operation with

文件：217.62 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Frequency Transducer/Pulse Counter 2-channel

The frequency transducer/pulse counter IMX12-FI01-2SF-2I-CPR/24VDC/CC is equipped with intrinsically safe input circuits and transmits frequency signals up to 20,000 Hz from the Ex area to the non-Ex area such that the signals are galvanically isolated. In addition, the input signals can be

文件：416.04 Kbytes 页数：5 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司

Isolating transducer 1-channel

The isolating transducers IM12-AI01-1I-2IUHPR/24VDC/CC transmit analog measured signals galvanically isolated. The devices are suitable for operation in zone 2. The 1-channel device has one input for the operation of HART® 2-wire transducers as well as active and passive HART® 2-wire transmi

文件：344.15 Kbytes 页数：4 Pages

TURCKTurck, Inc.

图尔克德国图尔克集团公司