74LVCH162374A集成电路（IC）的触发器规格书PDF中文资料

1. General description

The 74LVCH162374A is a 16-bit edge triggered flip-flop featuring separate D-type inputs for each

flip-flop and 3-state outputs for bus-oriented applications. The device consists of two sections of

8 edge-triggered flip-flops. A clock (CP) input and an output enable (OE) are provided for each

octal. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be

applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V

applications. The flip-flops store the state of their individual D-inputs that meet the set-up and

hold time requirements on the LOW to HIGH CP transition. When OE is LOW, the contents of the

flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high-impedance

OFF-state. Operation of the OE input does not affect the state of the flip-flops.

Bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

To reduce line noise, 30 Ω series termination resistors are included in both high and low output

stages.

2. Features and benefits

• 5 V tolerant inputs/outputs for interfacing with 5 V logic

• Wide supply voltage range from 1.2 V to 3.6 V

• CMOS low power consumption

• Multibyte flow-through standard pinout architecture

• Multiple low inductance supply pins for minimum noise and ground bounce

• Direct interface with TTL levels

• All data inputs have bus hold

• High-impedance outputs when VCC = 0 V

• Complies with JEDEC standard:

• JESD8-7A (1.65 V to 1.95 V)

• JESD8-5A (2.3 V to 2.7 V)

• JESD8-C/JESD36 (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-B exceeds 200 V

• CDM JESD22-C101E exceeds 1000 V

• Specified from -40 °C to +85 °C and -40 °C to +125 °C