74HC4059D中文资料飞利浦数据手册PDF规格书

GENERAL DESCRIPTION

The 74HC/HCT4059 are high-speed Si-gate CMOS devices and are pin compatible with the “4059” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT4059 are divide-by-n counters which can be programmed to divide an input frequency by any number (n) from 3 to 15 999. There are four operating modes, timer, divide-by-n, divide-by-10 000 and master preset, which are defined by the mode select inputs (Ka to Kc) and the latch enable input (LE) as shown in the Function table.

The complete counter consists of a first counting stage, an intermediate counting stage and a fifth counting stage. The first counter stage consists of four independent flip-flops. Depending on the divide-by-mode, at least one flip-flop is placed at the input of the intermediate stage (the remaining flip-flops are placed at the fifth stage with a place value of thousands). The intermediate stage consists of three cascaded decade counters, each containing four flip-flops.

FEATURES

• Synchronous programmable divide-by-n counter

• Presettable down counter

• Fully static operation

• Mode select control of initial decade counting function

(divide-by-10, 8, 5, 4 and 2)

• Master preset initialization

• Latchable output

• Easily cascadable with other counters

• Four operating modes:

timer

divider-by-n

divide-by-10 000

master preset

• Output capability: standard

• ICC category: MSI