74HC241PW集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

厂商型号	74HC241PW
参数属性	74HC241PW 封装/外壳为20-TSSOP（0.173"，4.40mm 宽）；包装为卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带；类别为集成电路（IC）的缓冲器驱动器接收器收发器；产品描述：IC BUFFER NON-INVERT 6V 20TSSOP
功能描述	Octal buffer/line driver; 3-state
封装外壳	20-TSSOP（0.173"，4.40mm 宽）
文件大小	246.06 Kbytes
页面数量	13 页
生产厂商	Nexperia B.V. All rights reserved
企业简称	NEXPERIA【安世】
中文名称	安世半导体(中国)有限公司官网
原厂标识
数据手册	下载地址一下载地址二到原厂下载
更新时间	2025-8-2 10:34:00
人工找货	74HC241PW价格和库存，欢迎联系客服免费人工找货

1. General description

The 74HC241; 74HCT241 is an 8-bit buffer/line driver with 3-state outputs. The device can be used

as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE),

each controlling four of the 3-state outputs. A HIGH on 1OE or LOW on 2OE causes the associated

outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use

of current limiting resistors to interface inputs to voltages in excess of VCC.

The 74HCT241 device features reduced input threshold levels to allow interfacing to TTL logic

levels.

2. Features and benefits

• Wide supply voltage range from 2.0 to 6.0 V

• CMOS low power dissipation

• High noise immunity

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• Input levels:

• For 74HC241: CMOS level

• For 74HCT241: TTL level

• Octal bus interface

• Non-inverting 3-state outputs

• Complies with JEDEC standards

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from −40 °C to +85 °C and −40 °C to +125 °C