74ALVCH16244DL中文资料74ALVCH16244DL - 2.5 V / 3.3 V 16-bit buffer/line driver (3-State)数据手册Nexperia规格书

描述 Description

2.5 V / 3.3 V 16-bit buffer/line driver (3-State) - The 74ALVC16244; 74ALVCH16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3-state outputs are controlled by the output enable inputs 1OE, 2OE, 3OE and 4OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. The 74ALVCH16244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors. The 74ALVC16244 has 5 V tolerant inputs.

特性 Features

·Wide supply voltage range from 1.2 to 3.6 V
·CMOS low power consumption
·MultiByte flow-through standard pin-out architecture
·Low inductance multiple VCC and GND pins for minimum noise and ground bounce
·Direct interface with TTL levels
·Bus hold on data inputs (74ALVCH16244 only)
·Output drive capability 50 Ω transmission lines at 85 Cel
·Current drive +-24 mA at 3.0 V
·Complies with JEDEC standard no. 8-1 A
·ESD protection: ·HBM EIA/JESD22-A114-A exceeds 2000 V
·MM EIA/JESD22-A115-A exceeds 200 V.