74ALVCH162244DGG中文资料16-bit buffer/line driver with 30 Ohm termination resistor; 3-state数据手册Nexperia规格书

描述 Description

The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-stateoutputs. Thedevice can be used as four 4-bit buffers, two 8-bit buffers or one 16-bitbuffer. The3-state outputs are controlled by the output enable inputs 1OE, 2OE, 3OE and 4OE. AHIGHonnOEcauses the outputs to assume a high-impedance OFF-state. The74ALVCH162244is designed with 30 Ω series resistors in both HIGH and LOW output states.
The 74ALVCH162244 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

特性 Features

• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low power consumption
• MultiByte flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins for minimum noise and ground bounce
• Direct interface with TTL levels (2.7 V to 3.6 V)
• Bus hold on all data inputs
• Integrated 30 Ω termination resistor
• Complies with JEDEC standards:
• JESD8-5 (2.3 V to 2.7 V)
• JESD8B/JESD36 (2.7 V to 3.6 V)

• ESD protection:
• HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V
• CDM JESD22-C101E exceeds 1000 V