5V49EE502NLGI集成电路（IC）的时钟发生器PLL频率合成器规格书PDF中文资料

5V49EE502NLGI属于集成电路（IC）的时钟发生器PLL频率合成器。由瑞萨科技有限公司制造生产的5V49EE502NLGI时钟发生器，PLL，频率合成器时钟发生器、PLL 和频率合成器集成电路 (IC) 可为逻辑器件提供参考信号的稳定定时脉冲，这些器件包括计算机、微控制器、数据通信系统和图形/视频发生器。这些集成电路可能包括缓冲器、驱动器、分频器、倍频器、多路复用器、合成器、扇出分配器和预分频器。

描述 Description

The 5V49EE502 is a programmable clock generator

intended for high performance data-communications,

telecommunications, consumer, and networking

applications. There are four internal PLLs, each individually

programmable, allowing for four unique non-integer-related

frequencies. The frequencies are generated from a single

reference clock. The reference clock can come from one of

the two redundant clock inputs. Automatic or manual

switchover function allows any one of the redundant clocks

to be selected during normal operation.

The 5V49EE502 is in-system, programmable and can be

programmed through the use of I2C interface. An internal

EEPROM allows the user to save and restore the

configuration of the device without having to reprogram it

on power-up.

Each of the four PLLs has an 7-bit reference divider and a

12-bit feedback divider. This allows the user to generate

four unique non-integer-related frequencies. The PLL loop

bandwidth is programmable to allow the user to tailor the

PLL response to the application. For instance, the user can

tune the PLL parameters to minimize jitter generation or to

maximize jitter attenuation. Spread spectrum generation

and/or fractional divides are allowed on two of the PLLs.

There are a total of four 8-bit output dividers. Each output

bank can be configured to support LVTTL, LVPECL, LVDS

or HCSL logic levels. Out0 (Output 0) supports 3.3V

single-ended standard only. The outputs are connected to

the PLLs via a switch matrix. The switch matrix allows the

user to route the PLL outputs to any output bank. This

feature can be used to simplify and optimize the board

layout. In addition, each output's slew rate and

enable/disable function is programmable.

特性 Features

• Four internal PLLs

• Internal non-volatile EEPROM

• Fast (400kHz) mode I2C serial interface

• Input frequency range: 1MHz to 200MHz

• Output frequency range: 4.9kHz to 500MHz

• Reference crystal input with programmable linear load

capacitance

— Crystal frequency range: 8MHz to 50MHz

• Two independently controlled VDDO (1.8V to 3.3V)

• Each PLL has a 7-bit reference divider and a 12-bit

feedback-divider

• 8-bit output-divider blocks

• Fractional division capability on one PLL

• Two of the PLLs support spread spectrum generation

capability

• I/O standards:

— Outputs: 1.8V to 3.3 V LVTTL/ LVCMOS

— Outputs: LVPECL, LVDS and HCSL

— Inputs: 3.3 V LVTTL/ LVCMOS

• Programmable slew rate control

• Programmable loop bandwidth

• Programmable output inversion to reduce bimodal jitter

• Redundant clock inputs with auto and manual switchover

options

• Individual output enable/disable

• Power-down mode

• 3.3V core VDD

• Available in 24-QFN package

• -40° to +85°C industrial temperature operation