5KP51A电路保护的TVS-二极管规格书PDF中文资料

Transient Voltage Suppression Diodes

Axial Leaded – 5000W > 5KP series

Description

The 5KP Series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features

• 5000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01

• Glass passivated chip junction in P600 package

• Fast response time: typically less than 1.0ps from 0 Volts to BV min

• Excellent clamping capability

• Typical failure mode is short from over-specifed voltage or current

• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c

• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)

• ESD protection of data lines in accordance with IEC 61000-4-2

• EFT protection of data lines in accordance with IEC 61000-4-4

• Low incremental surge resistance

• Typical IR less than 2μA when VBR min>12V

• High temperature to reflow soldering guaranteed:

260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension

• VBR @ TJ= VBR@25°C x (1+αT x (T J - 25))

(αT:Temperature Coeffcient, typical value is 0.1)

• Plastic package is flammability rated V-0 per Underwriters Laboratories

• Matte tin lead–free plated

• Halogen free and RoHS compliant

• Pb-free E3 means 2nd level interconnect is

Pb-free and the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-

Applications

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.